Non-INCRA Products

You are here: Home > Non-INCRA Products

> return to top

TABLE SAW ROUTER TABLE ACCESSORIES:

WOODPECKER COPING SLEDS

This is simply the best coping sled on the market, greatly improving your control when routing end grain. Great quality construction, nice details, versatile design.

PRECISION RULES:

WOODPECKERS 24" PRECISION T-SQUARE

The solid aluminum head and beam are flawlessly machined on Woodpeckers own CNC mills and richly anodized. Each square comes in a fitted, wall-mountable wooden case for protected storage and easy access.

WOODPECKERS 32" PRECISION T-SQUARE

These Precision T-Squares are absolutely beautiful and truly a joy to own and use, and they offer accuracy previously not available in tools large enough for big furniture or cabinet projects.

WOODPECKERS 24" PRECISION WOODWORKING RULE

As with all Woodpeckers products, these high-quality rules are machined in Ohio on their own CNC milling machines.

WOODPECKERS 36" PRECISION WOODWORKING RULE

These beautifully machined aluminum rules are great values overall and far better than the general purpose and construction tools found in most home centers.

SQUARES, ANGLES & STRAIGHT EDGES:

WOODPECKERS BC4-M2 BOX CLAMP

Save yourself tons of project assembly time and aggravation by ordering Woodpeckers BC4-M2 Box Clamps in pairs, 4-packs, 8-packs, or value 12-clamp value packs. Nearly indestructible glass-reinforced polymer clamps hold a broad variety of joints at right angles for easy assembly. Made in USA.

WOODPECKERS 24" STRAIGHT EDGE RULE

This is a combination of an incredibly accurate rule and a good-quality straight edge.

WOODPECKERS 24" PRECISION T-SQUARE

WOODPECKERS 32" PRECISION T-SQUARE

These Precision T-Squares are absolutely beautiful and truly a joy to own and use, and they offer accuracy previously not available in tools large enough for big furniture or cabinet projects.

JIG & FIXTURE:

WOODPECKERS MITER SLOT NUT 4PK

Easily attach feather boards and fixtures to the 15/16? T-slot in your machines? 3/4" x 3/8" miter slots with these unique steel nuts. Includes 4 sets of nuts, knobs, and hardware. Miter channel not included. Made in USA.

WOODPECKERS MULTI-KNOB 4PK 1/4", 5/16", & 3/8"

These unique knobs can be assembled either as female thru knobs by adding your own hex nuts or as male knobs of any thread length by using standard hex bolts. Super tough plastic construction, sized to accept hex nuts & bolts in 1/4", 5/16", or 3/8" thread sizes. Sold in packs of 4, fasteners not included. Made in USA.

WOODPECKERS MULTI-KNOB MINI-T (10 PK)

These unique knobs can be assembled either as female thru knobs by adding your own hex nuts or as male knobs of any thread length by using standard hex bolts. Super tough plastic construction, sized to accept 1/4"-20 hex nuts & bolts. Sold in packs of 10, fasteners not included. Made in USA.

SETUP TOOLS:

WOODPECKERS SAW GAUGE

The Saw Gauge uses a dial indicator with a 1" stroke and 1/1000" dial graduations, perfect for aligning the blade and rip fence to the saw's miter slot, checking saw blade runout, and even diagnosing internal problems like arbor and arbor flange runout.

WOODWORKING ACCESSORIES:

WOODPECKERS MITER SLOT NUT 4PK

Easily attach feather boards and fixtures to the 15/16" T-slot in your machines' 3/4" x 3/8" miter slots with these unique steel nuts. Includes 4 sets of nuts, knobs, and hardware. Miter channel not included. Made in USA.

WOODPECKERS MULTI-KNOB 4PK 1/4", 5/16", & 3/8"

WOODPECKERS MULTI-KNOB MINI-T (10 PK)

These unique knobs can be assembled either as female thru knobs by adding your own hex nuts or as male knobs of any thread length by using standard hex bolts. Super tough plastic construction, sized to accept 1/4"-20 hex nuts & bolts. Sold in packs of 10, fasteners not included. Made in USA.






> return to top
SETUP TOOLS:


	WIXEY WR365 DIGITAL ANGLE GAUGE WITH LEVEL This updated angle gauge is a big time saver, producing machine setups accurate to 0.1 degrees. Super strong magnets, the flip-up digital display, and a permanently calibrated level feature make it the best of its type. Imported.

	WIXEY MINI DIGITAL HEIGHT GAUGE The new Mini Digital Height Gauge's unique horseshoe-shaped body has magnetic feet and allows fast, accurate setups of cutter heights or fence setups in inches or millimeters. Includes snap-in depth probe for measuring holes or grooves. Imported.

	WIXEY 3" DIGITAL PROTRACTOR This 3" Digital Protractor is the more compact of the two Wixey models and is perfect for tight spaces such as setting up band saws.

	WIXEY 8" DIGITAL PROTRACTOR This 8" Digital Protractor is the larger of the two Wixey models and is a perfect choice for layout work with lumber or setting up larger machines.

	WIXEY DIGITAL HEIGHT GAUGE WITH FRACTIONS Designed specifically for woodworking, the Wixey Height Gauge allows precision cutter height settings in decimal inch, millimeters, and even fractions simultaneously using Wixey's exclusive Precise Fraction Technology.

	WIXEY DIGITAL CALIPERS WITH FRACTIONS Designed specifically for woodworking, Wixey's Digital Calipers accurately display decimal inches and fractions simultaneously using exclusive Precise Fraction Technology. Metric capability, too!

	WIXEY REMOTE DIGITAL READOUT WITH FRACTIONS Wixey's exclusive Precise Fraction Technology is now available in a universal remote readout that adds super-precise height setups to router lifts, shapers, etc. Displays decimal inch and fractions simultaneously. Metric capability, too!






> return to top
SETUP TOOLS:


	A-LINE-IT SYSTEM KIT The A-Line-It was selected as the "Top Value" in the WOOD Magazine article that compared woodworking machine alignment tools. FREE DVD covers all of the basics of getting your equipment fine-tuned. Align the blade to the miter slots Align the fence to the miter slot, either parallel or with a specific amount of relief at the outfeed end Check axial runout in the blade (the side-to-side wobble you see in blades as they turn slowly) Check axial runout of the fixed arbor flange Check radial (up/down) runout in the arbor shaft






> return to top
TABLE SAW & ROUTING ACCESSORIES:


	MICROJIG GRR-RIPPER SYSTEM - BASIC The GRR-Ripper System Basic is a thoroughly engineered system that can dramatically improve your safety and control over a broad range of machine operations. The MJGR-100 is the basic model and can be upgraded to MJGR-200 at any time with the addition of the accessory kit.

	MICROJIG GRR-RIPPER SYSTEM - ADVANCED The GRR-Ripper System Advanced is a thoroughly engineered system that can dramatically improve your safety and control over a broad range of machine operations.

	MICROJIG MICRODIAL TAPERING JIG Add refinement to your projects with a few accurate tapers set in either degrees or rise/run. Completely repeatable mechanism and exceptional safety when paired with 1 or 2 GR-200 GRR-Ripper 3D Pushblocks (sold separately).

	MICROJIG FITFINDER 1/2 MACHINE SETUP GAUGE The FitFinder 1/2 Gauge automatically finds half the thickness of your workpiece using simple geometry, no math or measuring required! Simplifies setting up resawing jobs, cutting half lap joints and more.

	MICROJIG MATCHFIT DOVETAIL TRACK CLAMP AP The Anti-Pivot Coil Spring keeps the clamp arm from dropping when unclamping – no need to constantly reset your clamp height during repetitive jobs, and the included X-PAD™ simultaneously applies vertical hold-down and lateral in-line pressure as the clamp tightens, letting you do more clamping with fewer clamps.

	MICROJIG BLADEMATCH ARBOR SHIMS Easily compensate for variations among your blades' widths! These high-quality stainless steel shims let you offset your blade's cut line to perfectly match the saw's riving knife, plus there's no need to re-zero the rip fence's scale with each blade change. Great for tweaking the kerf width of 2-piece box joint blade sets, too.

	MICROJIG DOVETAIL CLAMP PRO Get all the good stuff in one kit! It's the perfect introduction to the MicroJig MatchFit System's versatility.

	MICROJIG MAGNETIC DUST COVER FOR CABINET SAWS MicroJig's Magnetic Dust Cover closes the bevel slot on steel left-tilt cabinet saws, focusing dust collector airflow where it's most effective. Trim to fit with scissors, can be reversed for right-tilt cabinet saws or for cutting bevels.

	MICROJIG MATCHFIT X-PAD™ (4-PACK) The X-Pad™ is an upgrade for existing MatchFit Dovetail Clamps that allows you to clamp in two directions at once, simultaneously applying hold-down and in-line pressure as the clamp tightens. X-Pads slide onto the round cap of any MatchFit Dovetail Clamp.

	MICROJIG DEFLECTOR/CONNECTOR FOR THE GRR-RIPPER Ties together two GRR-Ripper units for working with longer lumber or to block debris when using a single unit. Requires GRHB-010 Handle Bridge; fits all GRR-Ripper models.

	MICROJIG 1/8" LEG FOR GRR-RIPPER SYSTEM The 1/8" leg for the GRR-Ripper allows safely ripping strips 1/8" - 9/32" wide between the fence and blade. Fits all GRR-Ripper Systems.

	MICROJIG MATCHFIT DOVETAIL CLAMPS (PAIR) These unique clamps will save you time and aggravation in too many ways to list! MatchFit clamps slide anywhere along a groove routed with a common 1/2" - 14 degree dovetail bit and leave one surface of your work clear of obstructions. Use these clamps to create customizable clamping tables and for attaching table extensions, sub fences, stop blocks, hold downs, and more to your machinery and work tables.

	MICROJIG MATCHFIT DOVETAIL BIT MicroJig's unique 1/2", 14 degree dovetail bit is designed specifically for routing grooves for the MicroJig MATCHFIT Dovetail Clamps, leaving a cleaner groove than conventional dovetail bits. Note: This router bit won't work for dovetail joinery with INCRA fence systems or dovetail jigs. Carbide tipped, 1/2" shank.

	MICROJIG MAGNETIC DUST COVER FOR CABINET SAWS MicroJig's Magnetic Dust Cover closes the bevel slot on steel left-tilt cabinet saws, focusing dust collector airflow where it's most effective. Trim to fit with scissors, can be reversed for right-tilt cabinet saws or for cutting bevels.

	MICROJIG GRR-RIPPER REPLACEMENT LEG SET MicroJig GRR-Ripper Replacement Leg Set Are the legs on your GRR-Ripper push blocks showing some wear & tear? This replacement leg set includes the standard 1/4" & 1/2" outer legs and the adjustable center leg, and they install quickly on all GRR-Ripper models using the original hardware.

	MICROJIG DADO STOP ACCESSORY FOR MATCHFIT CLAMPS MicroJig's new Dado Stop will eliminate endless fine tuning when setting up for dados, half-lap joints, and inlay work. Automatically adjusts for any cutter widths up to 13/16". For use with MatchFit Dovetail Clamps, sold separately.

	MICROJIG MATCHFIT DADO STOP PRO MicroJig's Dado Stop Pro eliminates endless fine tuning when setting up for dados, lap joints, and inlay work. Automatically adjusts for both the blade kerf and board thickness up to 13/16". Includes (1) each MatchFit Dado Stop, MatchFit Dovetail Clamp, & MatchFit Setup Gauge.

	MICROJIG DADO STOP STEUP GAUGE When you need accurate dados, the new Setup Gauge accessory for MicroJig's MatchFit Dado Stop makes that tool's setup even faster. The gauge records you blade kerf with a one-time cut, and then transfers that to your Dado Stop each time you set it to match a different material thickness. Order a couple to record your different kerf blades!

	MICROJIG GRR-RIPPER HANDLE BRIDGE Handy accessory for MJGR-100 and MJGR-200 GRR-Ripper models.

	MICROJIG GRR-RIPPER GRAVITY HEEL KIT MicroJig's New Gravity Heel improves the excellent GRR-Ripper 3D push block system by positively hooking onto the lumber's trailing end when you're working at the table saw, jointer, router table, or band saw. Retracts automatically or can be locked in place. 5 heel sections per pack, fits all GRR-Ripper models.


SPLITTERS:


	MICROJIG STEELPRO SPLITTER - FOR 1/8" KERF BLADES The SteelPro Splitters feature a stainless steel core for extra toughness and two splitters behind the blade for added kickback protection. Installs in any zero clearance throat plate, works with 1/8"-kerf blades (kerf width 0.118" - 0.145".)

	MICROJIG STEELPRO SPLITTER - FOR THIN KERF BLADES The SteelPro Splitters feature a stainless steel core for extra toughness and two splitters behind the blade for added kickback protection. Installs in any zero-clearance throat plate, works with thin-kerf blades (kerf width 0.090" - 0.118".)

	MICROJIG TABLE SAW SPLITTER - FOR 1/8" SAW BLADE Splitters are available in two thicknesses: MJSP-0125 is for use with 1/8"- wide full kerf blades, and the MJSP-0100TK works with thin-kerf blades between 0.090" to 0.118" in width.

	MICROJIG TABLE SAW SPLITTER - FOR THIN KERF SAW BLADE Splitters are available in two thicknesses: MJSP-0125 is for use with 1/8"- wide full kerf blades, and the MJSP-0100TK works with thin-kerf blades between 0.090" to 0.118" in width.






> return to top
SETUP TOOLS:


	IGAGING IP54 ANGLE GAUGE It's rechargeable! This 3rd generation Angle Cube is loaded with features: IP54 dust & moisture protection rating, displays level & tilt to 0.05 degrees, magnetic case, optional data output to computer, and more!

	IGAGING MAGNETIC LED WORK LIGHTS Improve your accuracy by getting a better view with this exclusive work light kit. Includes iGaging flexible-arm magnetic base, detachable LED flashlight, and a mounting plate with hardware.

	IGAGING DIGITAL DIAL INDICATOR Value priced, super-smooth Digital replacement for standard analog dial indicators. Reads in decimal inch, fractions, or millimeters. Mounting lug for the 1/4" or 6mm hardware found on most alignment tools and indicator bases. Imported.

	IGAGING ORIGINCAL 6" IP54 DIGITAL CALIPER iGaging's newest caliper is exceptional for the money - nicely finished, smooth action, and smart features with a 2-year warranty. "Absolute zero" based, point relative mode for checking tolerances, 6"/150mm range, 0.0005"/0.01mm resolution.

	IGAGING E-Z VIEW 6" DIGITAL CALIPER WITH FRACTIONS These stainless steel, 6"-range digital calipers feature a HUGE display for easy reading. Displays decimal inch, fractional inch, and millimeters at the press of a button.

	IGAGING ANGLE CUBE LEVEL/BEVEL GAUGE Measures relative angles for setting up machines or it works like a pocket level with 0.05 degree resolution.

	IGAGING 1" SNAP-DEPTH DIGITAL INDICATOR This handy gauge quickly measures groove or rabbet depths and works with many dial indicator bases. Reads in decimal inch, fractional inch, or millimeters.

	IGAGING 0-1" DIGITAL THICKNESS GAUGE Super handy, compact gauge quickly shows the thickness of your material in decimal inch, fractions, or millimeters. 0" to 1-1/6" range.

	IGAGING 22PC INDICATOR TIP SET 22pc set of dial indicator tips in a broad variety of lengths and shapes. Standard threads fit conventional dial and digital indicators.

	IGAGING MAGNETIC BASE W/ DIGITAL INDICATOR Universal magnetic base with iGaging Digital Indicator and micro-adjustable arms. Perfect for setting cutter height, making fences setups and general inspection work.


PRECISION RULES:


	IGAGING PREMIUM MARKING KNIFE Improve the accuracy of your layout work with this good quality, well-designed marking knife. 1.5" double-edged blade, 5" hardwood handle.


ANGLE BLOCK:


	IGAGING 10PC ANGLE BLOCK SET Precision ground steel angle blocks, 10pc set includes 1 degree, 2 degrees, 3 degrees, 4 degrees, 5 degrees, 10 degrees, 15 degrees, 20 degrees, 25 degrees & 30 degrees. Accuracy +/- 0.006 degrees.






> return to top
TABLE SAW & ROUTER TABLE ACCESSORIES:


	INCRA MAST-R-LIFT II New and improved! Allows precise height adjustments and change router bits above the table. Direct-drive, super low friction, and it's compatible with wide variety of fixed base routers without the need for adapters. Fits every INCRA router table.

	JESSEM WOOD SABRE MARKING GAUGE Unique features, good ergonomics, and exceptional accuracy make the new JessEm Wood Sabre the new standard for marking gauges. 6" range, micro adjustable to 1/256", aluminum and stainless steel construction. Made in Canada.

	JESSEM METRIC WOOD SABRE MARKING GAUGE New Metric version! Unique features, great ergonomics, and exceptional accuracy make the new JessEm Wood Sabre the new standard for marking gauges. 150mm range, micro adjustable to 0.1mm, aluminum and stainless steel construction.

	JESSEM CLEAR CUT STOCK GUIDES These burly aluminum stock guides hold lumber against your fence while holding it down & preventing kickback, replacing up to 4 conventional feather boards. Attach quickly to 1/4" router fence T-slots and set up fast with single-knob control. Made in Canada.

	JESSEM CLEAR CUT TS STOCK GUIDES For INCRA TS-LS and most other table saw fences. JessEm's new TS Stock Guides feature fast setup, kickback resistance, and the consistent hold down & hold-in pressure needed to get the cleanest cuts possible on your table saw. Compatible with most rip fences that have flat top surfaces, available with or without a riser kit for use with INCRA rip fences. Made in Canada.

	JESSEM 3/8" STANDARD DOWELING JIG KIT JessEm's new doweling system is easy to use and produces strong, accurate joinery by placing 3/8" dowel holes on the ends, edges, or faces of your workpiece. Use single rows of dowels or patterns in multiple rows for added strength.

	JESSEM 1/4", 3/8" & 1/2" MASTER DOWELING JIG KIT JessEm's new doweling system is easy to use and produces strong, accurate joinery. The Master Kit places dowel holes on the ends, edges, or faces of your workpiece in 1/4", 3/8" & 1/2" sizes. Use single rows of dowels or patterns in multiple rows for added strength.

	JESSEM 1/4" DOWELING JIG ACCESSORY KIT This 1/4" accessory kit for JessEm's #08350 doweling jig lets you use lumber as thin as 1/2", or you can install multiple rows of dowels in thicker lumber. Kit includes (7) 1/4" hardened guide bushings mounted in a guide bushing carrier, 1/4" drill bit, 1/4" depth stop, and 1/4" indexing pin.

	JESSEM 1/2" DOWELING JIG ACCESSORY KIT This 1/2" accessory kit for JessEm's #08350 doweling jig is a perfect upgrade if your projects call for 1" or thicker lumber, giving you maximum strength to hold together those large project parts. Kit includes (3) 1/2" hardened guide bushings mounted in a guide bushing carrier, 1/2" drill bit, 1/2" depth stop, and 1/2" indexing pin.

	EXCEL HARDWOOD DOWEL PINS IN 1/4", 3/8", OR 1/2" Made from the highest quality birch and beech lumber, the fluted design eliminates air pockets for quick, even dispersion of glue to create a strong bond. The 1-1/2" or 2" lengths are easily shortened when necessary. Sold in bags of 100; use the selector below to choose from 4 popular sizes.

	JESSEM POW-R-TEK REMOTE SAFE ROUTER SWITCH JessEm’s new heavy duty 15 Amp switch allows switching the router without reaching under the table. The steel outer housing is carried by a stainless-steel bracket that attaches easily to INCRA router table stands, TS rail systems, or other router tables with 1/4"-20 hardware.


ROUTER TABLE SWITCH & FEATHER BOARDS:


	JESSEM PARALIGN FEATHER BOARD (DOUBLE PACK) The Paralign Double Pack includes hardware for stacking both feather boards together, perfect for controlling taller panels on a router table or when resawing at the band saw.

> return to top







WOODWORKER-II KERF BLADES:


	FORREST WOODWORKER-II 40T 10" X 1/8" KERF The best all-around saw blade available, with super smooth cuts for both ripping and crosscutting. 40T, full 1/8" kerf, 10" dia, 5/8" bore. Made in USA.

	FORREST WOODWORKER-II 40T 10" X 3/32" KERF The best all-around saw blade available, with super smooth cuts for both ripping and crosscutting. 40T, 3/32" thin kerf, 10" dia, 5/8" bore. Made in USA.

DADO KING/BOX JOINT BLADES:


	FORREST 8" DADO KING STACKING DADO SET W/ CASE Consistently rated as the best performing dado set on the market. 1/4" to 29/32" width range, 8" dia, 5/8" bore, fine-adjustment shims and case included. Requires a throat plate for the saw that accommodates a wide cutter. Made in USA.

	FORREST 8" 2-PC BOX JOINT BLADE SET A really high performance solution for cutting 1/4" or 3/8" box joints, this affordable two-piece set cuts cleanly and quietly. 8" dia, 5/8" bore fits most 10" table saws. Requires a throat plate for the saw that accommodates a wide cutter. Made in USA.

> return to top








PORTER-CABLE ROUTERS:


	PORTER-CABLE 9-PIECE GUIDE BUSHING SET Set includes 7 steel guide bushings in popular sizes plus two lock rings, all in a fitted case. Compatible with all brands of router bases or router plate rings that have a recessed 1-3/16" center hole. Made in USA, 3yr warranty.

	PORTER-CABLE 42999 1/4" COLLET ASSEMBLY This replacement collet assembly for 1/4"-shank router bits is compatible with the 75182 motor and most newer Porter-Cable routers (check your router's parts list for compatibility).






> return to top
PORTER BIT SETS:


	WHITESIDE K-41 PATTERN ROUTING BIT This bit's short cutting length and shank-mounted pilot bearing are perfect for creating router table openings with the INCRA table routing template. Carbide tipped and precision ground; 1/4" shank.

	WHITESIDE WS-401 BASIC ROUTER BIT SET This affordable set includes 7 must-have router bits. If you want to improve your router's performance at the most fundamental level, this set is the place to start. All bits are carbide-tipped, precision ground to incredible sharpness, and 1/2" shank.

	WHITESIDE WS-501 ROUNDOVER & BEADING BIT SET This 4-piece set contains the most popular sizes of workhorse round over bits, and the set also includes alternate pilot bearings to convert the bits from roundover to edge beading operation. All bits are carbide-tipped, precision ground to incredible sharpness, and 1/2" shank.

	WHITESIDE WS-480 MULTI-BEADING ROUNDOVER BIT SET The three bits in this set can be used as standard roundover bits, but instead of cutting only shallow 1/16" beads, their large diameters and alternate bearings allow them to cut deeper beads of 1/8" and 3/16" for creating profiles that are visually bolder. All bits are carbide-tipped, precision ground to incredible sharpness, and 1/2" shank.

	WHITESIDE WS-410 TEN ESSENTIAL ROUTER BITS This is a great set of 10 handy bits for general woodworking. All bits are carbide tipped or solid carbide and feature Whiteside's famous quality and consistency.

	605-WHITESIDE 6-PIECE INCRA JOINERY ROUTER BIT SET These are the six router bits that produce the most popular joints. 1/4" and 3/8" diameter straight bits produce box joints and are used for countless other operations in your projects. This set also includes the four most frequently used dovetail bits: 3/8" - 9 degree, 1/2" - 14 degree, 5/8" - 7 degree, and 3/4" - 7 degree.

	610-WHITESIDE 6-PIECE METRIC INCRA JOINERY ROUTER BIT SET These are the six router bits that produce the most popular joints. 6mm and 10mm diameter straight bits produce box joints and are used for countless other operations in your projects. This set also includes four dovetail bits to cover a wide variety of material thicknesses: 5/16"-10 degree, 1/2"-14 degree, 5/8"-7 degree, and 3/4" -7 degree.

	600 WHITESIDE 8-PIECE INCRA HINGECRAFTER ROUTER BIT SET Each wooden hinge requires a full-radius bullnose bit to shape the hinge barrel and a similarly-sized straight bit to cut the mating halves of the hinge. This set contains all of the bits necessary to produce wooden hinges with 3/8", 1/2", 5/8", and 3/4" barrel diameters.

	6M-600 WHITESIDE 8-PIECE INCRA HINGECRAFTER ROUTER BIT SET Each wooden hinge requires a full-radius bullnose bit to shape the hinge barrel and a similarly-sized straight bit to cut the mating halves of the hinge. This set contains all of the bits necessary to produce wooden hinges with 3/8" (9.52mm), 1/2" (12.70mm), 5/8" (15.88mm), and 3/4" (19.05mm) barrel diameters using the metric HingeCrafter and a metric Incra router fence system.

> return to top







ROUTERS & ACCESSORIES:


	MILWUKEE 5625-20 HEAVY DUTY 3.5HP ROUTER Milwaukee’s 3.5hp production router is ideally paired with an INCRA Router Lift, it works great with conventional router mounting plates, and it’s even remarkably easy to use freehand. Includes 1/2" precision collet, forged wrenches, and an above-table height adjuster. Imported. 5yr limited warranty.

	MILWUKEE 1/4" ROUTER COLLET ASSEMBLY Don’t forget this extra collet! The 3.5hp Milwaukee 5625-20 routers include only the 1/2” collet, and many smaller router bits are only available with 1/4” shanks. Milwaukee collets are more accurate than most, so we consider using the 1/4” collet a better solution than using the 1/2” collet with a sleeve-type reducer. Compatible with the Milwaukee 5625-20, 5626, 5616-(xx), and 5615-(xx) routers.

	> return to top

WOODWORKING ACCESSORIES:

RIDGE CARBIDE TS2000 10" x 40T SAW BLADE

Don't like changing blades? Ridge Carbide's TS2000 offers exceptional performance across a wide range of jobs - super smooth rips and crosscuts in solid lumber up to 2" thick, splinter-free cuts in plywood, and even basic joinery. Yes, there really is a difference between premium blades like Ridge Carbide & Forrest over the blades sold in big-box stores. 10" x 40T alternate top bevel grind w/ 8 flat raker teeth, 1/8" full kerf or 3/32" thin kerf, 5/8" arbor.

RIDGE CARBIDE TS2000 10” x 60T SAW BLADE

The 60-tooth version of the TS2000 is the ideal tool for extended crosscutting jobs in solid lumber and for ripping & crosscutting chip-prone sheet goods. Yes, there IS a difference between premium blades like Ridge Carbide & Forrest over the blades sold in big-box stores. 10” x 60T alternate top bevel grind, 1/8” (0.125”) kerf, 5/8” arbor.

RIDGE CARBIDE 8" STACK DADO

Ridge Carbide's tight tolerances, extreme sharpness, and -5° hook angle will provide tearout-free grooves in both solid lumber and on fragile surfaces like veneered plywood or melamine. Adjustable from 1/4" to just over 7/8", including widths like 15/32" & 23/32" for undersized plywood, and includes mental shims for fine-tuning. 8" diameter, 5/8" arbor.

RIDGE CARBIDE TRIPLE PLAY BOX JOINT BLADE SET

The Triple Play is another great value in Ridge Carbide' long line of top-quality cutters - tight tolerances, extreme sharpness, and a moderate price. It's adjustable like a stack dado but cuts like dedicated flat-topped box joint blades. Kerf adjustable from 3/16" - 7/16" and micro-adjustable with included metal shims. Note: Designed for box joints and long-grain grooves only - use a conventional dado set for cross-grain cuts.

> return to top


	Can't find what you are looking for? Please call our toll free number: 1.888.804.6272 Business Hours: Monday through Friday: 9:00AM ~ 5:00PM (ET) or email your questions to:[email protected]

> return to top

COMPANY

MY ACCOUNT

CONTACT