Home > TS-LS Accessories >

Ridge Carbide TS2000 10” x 60T Saw Blade
Ridge Carbide TS2000 10” x 60T Saw Blade

The 60-tooth version of the TS2000 is the ideal tool for extended crosscutting jobs in solid lumber and for ripping & crosscutting chip-prone sheet goods. Yes, there IS a difference between premium blades like Ridge Carbide & Forrest over the blades sold in big-box stores. 10” x 60T alternate top bevel grind, 1/8” (0.125”) kerf, 5/8” arbor.

Made in USA.

Our Price: $149.95
Sale Price: $129.95
You save $20.00!

Estimated availability: Usually Ships in 2 to 3 Business Days
Product Code: RC-TS21060A-58

Ridge Carbide TS2000 10"x60T Saw Blade
Table Saw Crosscutting & Plywood, 1/8" Full Kerf

As good as Ridge Carbide’s 40-tooth TS2000 is for everyday work, for extended crosscutting jobs and ripping & crosscutting chip-prone sheet goods, it’s worth owning an alternative. Are you using an INCRA miter gauge or sled to produce parts for frames or segmented turnings? The 60-tooth TS2000 is the ideal tool.

This American-made TS2000’s top-shelf materials, razor sharpness, and tight tolerances help it outperform 80T blades from big-box stores. Some of the highlights:
Super accurate cuts – the 0.087”-thick body makes the TS2000 stiffer than thin kerf blades.

In hardwoods, the 60-tooth alternate top bevel grind shears the wood’s fibers for super smooth crosscuts.

For veneered plywood and melamine-coated panels, the shallow +5° rake angle produces a very clean bottom surface without the crawling feed rate of 80T, negative-rake blades.

Sharper blades work better! Most blades are ground to only 400 grit, but Ridge Carbide finishes the tops and faces of the teeth with 1,200 grit diamond wheels. The tips literally gleam!

Extra-thick C-4 carbide tips let you sharpen the TS2000 20-25 times, giving these blades a life expectancy of 10 to 20 years in a typical home shop.

Fantastic value: You’ll spend $300 in sharpening costs over the life of ANY blade, so why give up performance by spending less on the blade up front?

If you’ve been spending $60 – $70 on mass-market blades of different colors, treat yourself to something better. Instead of gimmicks like low-friction paint and vibration reducing gizmos, your money buys you top-shelf materials, razor sharpness, and tight manufacturing tolerances.

Quick Tip:
Ridge Carbide’s sharpening service is the best in the business…do yourself a favor and don’t send your blades anywhere else for service.


Size: 10” Diameter, 60 Teeth

Arbor: 5/8”

Carbide Tips: Micro Grain C-4

Tip Grind: 20° Alternate Top Bevel

Hook Angle (Rake): +5°

Kerf Width: 1/8” (0.125”)

Body Thickness: 0.087”

Made in USA.

Browse for more products in the same category as this item:

TS-LS Accessories
See All
See All > Saw Blades & Dadoes
TS-LS Accessories > Ridge Carbide Blades