You are here: Home > Jig & Fixture Components
RELATED SHOP ACCESSORIES/
JIG & FIXTURE COMPONENTS


SHOP NOW AT INCREMENTAL TOOLS



INCRA BUILD-IT SYSTEM


The INCRA Build-It Modular Jig & Fixture Platform System is a revolutionary time saver for constructing a huge variety of common and special purpose jigs such as coping sleds, tenoning jigs, table saw crosscutting sleds, and many more.

The adjustable miter slot runners screw to predrilled universal panels to form an accurate foundation for the jig, panels can be quickly linked together, and the various knobs, T-Tracks, brackets, and connectors make short work of attaching the jig's remaining components

INCRA Build-It Panel - Large (11.75" x 15.50")

INCRA Build-It Panel - Small (7.75" x 15.50")
INCRA Build-It T-Slot Connector - 18"
INCRA Build-It T-Slot Connector - 24"
INCRA Miter Slider SE- 18"
INCRA Miter Slider SE - 25.5"
INCRA Miter Slider - 18"
INCRA Miter Slider - 24"
INCRA Build-It Brackets
INCRA Build-It Clamp
INCRA Build-It Twist Handle Knobs

INCRA Build-It Ratchet Lever Knobs


INCRA BUILD-IT SYSTEM STARTER KIT


The Build-It System allows fast construction of all sorts of handy jigs and fixtures, but what if you're not sure where to start? The Starter Kit is the perfect solution. It includes at least one of every system component at a discounted price and start-to-finish plans for 5 different jigs & more. It's expandable with additional Build-It components, and virtually all the parts can be recycled into a different jig when the need arises.

INCRA Build-It System Starter Kit
Jigs You Can Make with New Build-It System Starter Kit

INCRA T-TRACKS


INCRA T-Track Regular is a single T-Track, no scale. T-Track Plus is the only T-Track with an included adjustable scale.

Choose from four lengths. Can be cut to fit your jig exactly.

INCRA T-Track Regular -18"
INCRA T-Track Regular -24"
INCRA T-Track Regular -36"
INCRA T-Track Regular -48"
INCRA T-Track Plus -18"
INCRA T-Track Plus -24"
INCRA T-Track Plus -36"
INCRA T-Track Plus -48"

INCRA AND WOODPECKERS TRACK CLAMPS


Great clamping options for any application! Compatible with INCRA & Woodpeckers T-Tracks and most brands that use 1/4"-20 hardware.
Made in USA.

INCRA I-BOX JIG FOR BOX JOINTS


This is the most advanced box joint jig ever produced! Works at both table saws and router tables, features micro-adjustable joint tightness, and allows pin widths from 1/8" - 3/4". Fast setup for basic joints, plus advanced capability for unique decorative joints, too. Hand screw clamp not included. Made in USA.

INCRA MITER SLIDER SE


Here's a new product that combines the versatility of the INCRA
Build-It products with the unique performance and feel of the adjustable GlideLOCK miter bar used on INCRA Miter Gauges. The new steel Miter Slider SE are more rigid than any wooden or plastic runners, and they're not susceptible to changes in humidity or temperature.

INCRA Miter Slider SE- 18"

INCRA Miter Slider SE - 25.5"

INCRA MITER SLIDER


This long aluminum runner adjusts from the TOP for perfect sliding action in any standard 3/4" x 3/8" miter gauge slot. Won't warp, shrink, or swell like wooden runners.

INCRA Miter Slider - 18"

INCRA Miter Slider - 24"

INCRA TRACK SYSTEM


The INCRA Track System is designed for maximum versatility in your woodworking shop. Including INCRA Track & INCRA Shop Stop. Available in 3 sizes:

INCRA Track System - 18" Track & Shop Stop
INCRA Track System - 36" Track & Shop Stop
INCRA Track System - 52" Track & Shop Stop
INCRA Track System - 18" Track ONLY
INCRA Track System - 36" Track ONLY
INCRA Track System - 52" Track ONLY
INCRA Track System - Shop Stop ONLY

INCRA MITER CHANNELS


Now you can add an INCRA T-Slot Miter Channel to any router table or user-made fixture for use with your miter gauge, feather boards, hold-downs or sliding jigs.

INCRA Miter Channel - 32"

INCRA Miter Channel - 48"

PORTER-CABLE 9-PIECE GUIDE BUSHING SET


Set includes 7 steel guide bushings in popular sizes plus two lock rings, all in a fitted case. Compatible with all brands of router bases or router plate rings that have a recessed 1-3/16" center hole. Made in USA, 3yr warranty
.

JESSEM 3/8" STANDARD DOWELING JIG KIT


JessEm's new doweling system is easy to use and produces strong, accurate joinery by placing 3/8" dowel holes on the ends, edges, or faces of your workpiece. Use single rows of dowels or patterns in multiple rows for added strength.

JESSEM 1/4", 3/8" & 1/2" MASTER DOWELING JIG KIT


JessEm's new doweling system is easy to use and produces strong, accurate joinery. The Master Kit places dowel holes on the ends, edges, or faces of your workpiece in 1/4", 3/8" & 1/2" sizes. Use single rows of dowels or patterns in multiple rows for added strength.

JESSEM 1/4" DOWELING JIG ACCESSORY KIT


This 1/4" accessory kit for JessEm's #08350 doweling jig lets you use lumber as thin as 1/2", or you can install multiple rows of dowels in thicker lumber. Kit includes (7) 1/4" hardened guide bushings mounted in a guide bushing carrier, 1/4" drill bit, 1/4" depth stop, and 1/4" indexing pin.

JESSEM 1/2" DOWELING JIG ACCESSORY KIT


This 1/2"
accessory kit for JessEm's #08350 doweling jig is a perfect upgrade if your projects call for 1" or thicker lumber, giving you maximum strength to hold together those large project parts. Kit includes (3) 1/2" hardened guide bushings mounted in a guide bushing carrier, 1/2" drill bit, 1/2" depth stop, and 1/2" indexing pin.

EXCEL HARDWOOD DOWEL PINS IN 1/4", 3/8", OR 1/2"


Made from the highest quality birch and beech lumber, the fluted design eliminates air pockets for quick, even dispersion of glue to create a strong bond. The 1-1/2" or 2" lengths are easily shortened when necessary. Sold in bags of 100; use the selector below to choose from 4 popular sizes.

JIG & FIXTURE WORK LIGHTS


Improve your accuracy by getting a better view with this exclusive work light kit. Includes iGaging flexible-arm magnetic base, detachable LED flashlight, and a mounting plate with hardware.

MICROJIG MICRODIAL TAPERING JIG


Add refinement to your projects with a few accurate tapers set in either degrees or rise/run. Completely repeatable mechanism and exceptional safety when paired with 1 or 2 GR-200 GRR-Ripper 3D Pushblocks (sold separately).

WOODPECKERS COPING SLED


This is simply the best coping sled on the market, greatly improving your control when routing end grain. Great quality construction, nice details, versatile design.



MICROJIG MATCHFIT DOVETAIL TRACK CLAMP AP


The Anti-Pivot Coil Spring keeps the clamp arm from dropping when unclamping û no need to constantly reset your clamp height during repetitive jobs, and the included X-PADآ simultaneously applies vertical hold-down and lateral in-line pressure as the clamp tightens, letting you do more clamping with fewer clamps.


MICROJIG MATCHFIT DOVETAIL CLAMPS (PAIR)


These unique clamps will save you time and aggravation in too many ways to list! MatchFit clamps slide anywhere along a groove routed with a common 1/2" - 14 degree dovetail bit and leave one surface of your work clear of obstructions. Use these clamps to create customizable clamping tables and for attaching table extensions, sub fences, stop blocks, hold downs, and more to your machinery and work tables.


MICROJIG DOVETAIL CLAMP PRO


Get all the good stuff in one kit! It's the perfect introduction to the MicroJig MatchFit System's versatility.




MICROJIG MATCHFIT X-PAD™ (4-PACK)


The X-Pad™ is an upgrade for existing MatchFit Dovetail Clamps that allows you to clamp in two directions at once, simultaneously applying hold-down and in-line pressure as the clamp tightens. X-Pads slide onto the round cap of any MatchFit Dovetail Clamp.


MICROJIG MATCHFIT DOVETAIL BIT


MicroJig's unique 1/2", 14° dovetail bit is designed specifically for routing grooves for the Micro Jig MATCHFIT Dovetail Clamps, leaving a cleaner groove than conventional dovetail bits. Note: This router bit won't work for dovetail joinery with INCRA fence systems or dovetail jigs.

Carbide tipped, 1/2" shank.


MICROJIG DADO STOP ACCESSORY FOR MATCHFIT CLAMPS


MicroJig's new Dado Stop will eliminate endless fine tuning when setting up for dados, half-lap joints, and inlay work. Automatically adjusts for any cutter widths up to 13/16".

For use with MatchFit Dovetail Clamps, sold separately. Made in USA.


MICROJIG MATCHFIT DADO STOP PRO


MicroJig's Dado Stop Pro eliminates endless fine tuning when setting up for dados, lap joints, and inlay work. Automatically adjusts for both the blade kerf and board thickness up to 13/16". Includes (1) each MatchFit Dado Stop, MatchFit Dovetail Clamp, & MatchFit Setup Gauge.


MICROJIG DADO STOP STEUP GAUGE


When you need accurate dados, the new Setup Gauge accessory for Micro Jig's MatchFit Dado Stop makes that tool's setup even faster. The gauge records you blade kerf with a one-time cut, and then transfers that to your Dado Stop each time you set it to match a different material thickness. Order a couple to record your different kerf blades!

WOODPECKERS MITER SLOT NUT 4PK


Easily attach feather boards and fixtures to the 15/16" T-slot in your machines' 3/4" x 3/8" miter slots with these unique steel nuts. Includes 4 sets of nuts, knobs, and hardware. Miter channel not included. Made in USA.

WOODPECKERS MULTI-KNOB 4PK 1/4", 5/16", & 3/8"


These unique knobs can be assembled either as female thru knobs by adding your own hex nuts or as male knobs of any thread length by using standard hex bolts. Super tough plastic construction, sized to accept hex nuts & bolts in 1/4", 5/16", or 3/8" thread sizes. Sold in packs of 4, fasteners not included. Made in USA.

WOODPECKERS MULTI-KNOB MINI-T (10 PK)


These unique knobs can be assembled either as female thru knobs by adding your own hex nuts or as male knobs of any thread length by using standard hex bolts. Super tough plastic construction, sized to accept 1/4"-20 hex nuts & bolts. Sold in packs of 10, fasteners not included. Made in USA.

WOODPECKERS BC4-M2 BOX CLAMP


Save yourself tons of project assembly time and aggravation by ordering Woodpeckers BC4-M2 Box Clamps in pairs, 4-packs, 8-packs, or value 12-clamp value packs. Nearly indestructible glass-reinforced polymer clamps hold a broad variety of joints at right angles for easy assembly. Made in USA.

INCRA JUMBO RIGHT FIXTURE


The INCRA Jumbo Right Angle Fixture is used to hold your workpiece perpendicular to the table surface during end grain cutting operations.