You are here: Home > Router System Accessories
INCRA ROUTER TABLE FENCES/
ROUTER SYSTEM ACCESSORIES

You may want to add routing functions to your INCRA saw fence, or maybe you've realized that your LS router system deserves a better router table. Whatever your needs, you've found the source for accessories and upgrades that unlock your INCRA system's full potential.

INCRA has taken a modular approach to producing table saw and router fence systems for twenty years, a concept which allows you to cost-effectively expand your system and allows owners of earlier systems to upgrade to the performance of the latest INCRA products.

If you need expert advice or don't find what you're looking for, call us directly at 1.888.804.6272.




UPGRADE YOUR ROUTER TABLE SYSTEM NOW!

INCRA I-BOX JIG FOR BOX JOINTS


This is the most advanced box joint jig ever produced! Works at both table saws and router tables, features micro-adjustable joint tightness, and allows pin widths from 1/8" - 3/4". Fast setup for basic joints, plus advanced capability for unique decorative joints, too. Hand screw clamp not included. Made in USA.

Click here to see all I-Box Combos & Accessories


INCRA MAST-R-LIFT II & MAST-R-LIFT II CONVERSIONS


New and improved! Allows precise height adjustments and change router bits above the table. Direct-drive, super low friction, and it's compatible with wide variety of fixed base routers without the need for adapters. Fits every INCRA router table.



INCRA QUICKLIFT ROUTER LIFT


The INCRA/Woodpeckers collaboration allows fast, precise height adjustments and changing router bits above the table. The included (5) MagnaLock rings can be swapped quickly and without tools to handle different router bits, and the CleanSweep dust collection rings can be added as options. 9-1/4" x 11-3/4" x 3/8" plate size fits all INCRA Router Tables and some other brands. 3 versions available.


INCRA PRL-V2 LIFT ADAPTOR PADS


The PRL-V2 uses a set of three motor mounting pads to match the carriage to the outside diameter of a variety of router motors, so setting up the lift to accept a different router is as easy as changing to the appropriate motor pads.


ROUTER FENCE REPLACEMENT PARTS


Whether you're replacing crash-damaged parts or want additional INCRA components for a custom installation, this portion of Incremental Tools provides direct access to the parts, accessories, and sub-assemblies that are most often asked for.

PUSHGUARD & HOLD DOWNS


Make your woodworking safer with our broad selection of push blocks and hold downs for every application.

ROUTERS & ACCESSORIES


Complete your INCRA system with a new router!

FREE STANDING ROUTER TABLE TOPS


INCRA Router Fence Systems can be installed on any router table. Solid Aluminum MagnaLOCK Plate Included.

24" x 32" Center Mount Router Table Top
24" x 36" Offset Router Table Top
27" x 43" Offset Router Table Top


INCRA CLEANSWEEP DUST COLLECTION


Keeps your shop cleaner by collecting sawdust at the source using your 4" dust collector! Easy-assembling precision molded ABS & steel cabinet attaches to the underside of laminated MDF or phenolic router tables from INCRA, Woodpeckers, and many others.

INCRA CleanSweep Dust Collection Combo
INCRA CleanSweep Dust Collection Cabinet
INCRA 6-pc CleanSweep MagnaLOCK Ring Set
Individual INCRA CleanSweep MagnaLOCK Rings
INCRA CleanSweep MagnaLOCK Porter-Cable Guide Bushing Ring
INCRA CleanSweep Router Table Adapter


INCRA MAGNALOCK RINGS


Simply drop any plate into the keyed recess and the MagnaLock plate snaps smartly into place held securely in place by 4 high-energy rare earth Magnets.

Buy Individual INCRA MagnaLOCK Ring
INCRA MagnaLOCK Ring Set - 8 Rings
INCRA 6-pc CleanSweep MagnaLOCK Ring Set
Individual INCRA CleanSweep MagnaLOCK Rings
INCRA CleanSweep MagnaLOCK Porter-Cable Guide Bushing Ring
Porter-Cable 9-piece Guide Bushing Set
INCRA MagnaLOCK Solid Insert


INCRA MAGNALOCK ROUTER TABLE PLATES


INCRA's 3/8" solid aluminu mounting plates are the new standard for achieving perfect cutting results at your router table.


PORTER-CABLE 9-PIECE GUIDE BUSHING SET


Set includes 7 steel guide bushings in popular sizes plus two lock rings, all in a fitted case. Compatible with all brands of router bases or router plate rings that have a recessed 1-3/16" center hole. Made in USA, 3yr warranty.


INCRA ROUTER TABLE STANDS


INCRA's new Router Table Stands provide a rock solid base to build on. Available in 2 sizes.

Router Table Stand - for UP to 36" Wide Table
Router Table Stand - for UP to 43" Wide Table


INCRA JIG FENCE SYSTEM


Designed for the Original INCRA Jig. Combine this Fence System with the INCRA Jig Positioner for all standard router table work.


INCRA SHELF SUPPORTS


These are extra sets of the short stringers for the Router Table Stand 36 and Router Table Stand 43.

Wooden panel not included.




JESSEM POW-R-TEK REMOTE SAFE ROUTER SWITCH


JessEmق€™s new heavy duty 15 Amp switch allows switching the router without reaching under the table. The steel outer housing is carried by a stainless-steel bracket that attaches easily to INCRA router table stands, TS rail systems, or other router tables with 1/4"-20 hardware.


INCRA ROUTER STAND WHEEL KITS


Use this INCRA Wheel Kit to make your router table mobile in a small shop. Compatible with our Router Table Stand 36 and Router Table Stand 43.


INCRA LS POSITIONER UPGRADES


The LS is the beefiest positioner we've ever produced, with rock-solid capacities of 17", 25", or 32".

INCRA LS 17" Range Positioner ONLY
INCRA LS 25" Range Positioner ONLY
INCRA LS 32" Range Positioner ONLY


INCRA WONDER FENCE UPGRADES


Upgrade an Ultra, Ultra Lite, or LS Router System to the versatility of the Wonder Fence! Fully adjustable fence halves accommodate the largest router bits and allow precise fence offsets for edge jointing or moulding operations.


INCRA PRO-II JOINERY FENCE


The INCRA Pro-II Fence System includes the machined 28" fence section, incremental racks, and 13" Telescoping Stop Extender Bar.

Now available for imperial or metric INCRA Systems!


INCRA JUMBO RIGHT FIXTURE


The INCRA Jumbo Right Angle Fixture is used to hold your workpiece perpendicular to the table surface during end grain cutting operations.


MASTER REFERENCE GUIDE & TEMPLATE LIBRARY


Written by INCRA expert Perry McDaniel, this complete guide contains clear, step-by-step instructions for making Box Joints, Half Blind and Through Dovetails, and INCRA's trademark Double and Double-Double Joints.


INCRA PROJECTS & TECHNIQUES BOOK


This 148 page book contains detailed plans with over 400 illustrations and photos to build 14 of Perry McDaniel's intriguing original projects. Available in both hardcopy and downloadable versions.

Order hardcopy click here
Order downloadable version click here


WOODPECKERS COPING SLED


This is simply the best coping sled on the market, greatly improving your control when routing end grain. Great quality construction, nice details, versatile design.


ROUTER BIT SETS


Whiteside bits are as good as you'll find, earning #1 ratings in both of the past two Fine Woodworking Magazine router bit comparison tests.

8-Piece INCRA HingeCrafter Router Bit Set
6-Piece INCRA Joinery Router Bit Set
6-Piece Metric INCRA Joinery Router Bit Set
8-Piece Metric INCRA HingeCrafter Router Bit Set
Whiteside Ten Essential Router Bits
Whiteside Basic Router Bit Set
Whiteside Roundover & Beading Bit Set
Whiteside Multi-Beading Roundover Bit Set
Whiteside K-41 Pattern Routing Bit

INCRA HINGECRAFTER


The INCRA HingeCrafter serves as a drilling guide for solid wood hinges in 3/8" (9.52mm), 1/2" (12.70mm), 5/8" (15.88mm) & 3/4" (19.05mm) barrel sizes and up to 10" long. Just combine your 1/32"- or metric-based INCRA Positioner or I-Box with the HingeCrafter drill guide and the results will be beautiful wooden hinges ready to glue right into your project. Made in USA.

INCRA ROUTER TABLE PLATE TEMPLATE


This 3/4"-thick MDF template is machined on computerized equipment to produce a perfect fitting opening for INCRA or Woodpeckers router lifts and router mounting plates.

ROUTER FENCE STOPS


INCRA Shop Stop - The INCRA Shop Stop is our most versatile stop. The vertical stop bar is adjustable up and down, it can be reversed, and it has a screw-based micro adjust.

METRIC COMPONENTS


The Metric Conversion Kit contains everything needed to convert the LS Positioner System from imperial incremental mechanics to a 1mm metric spacing. Metric Rack Packs and scales can convert any incremental rack-based INCRA positioning product from imperial to a 1mm metric spacing.

IGAGING MAGNETIC LED WORK LIGHTS


Improve your accuracy by getting a better view with this exclusive work light kit. Includes iGaging flexible-arm magnetic base, detachable LED flashlight, and a mounting plate with hardware.

SETUP TOOLS


Wixey Digital Height Gauge w/ Fractions
Wixey Digital Calipers w/ Fractions
Wixey Remote Digital Readout w/ Fractions
iGaging Digital Dial Indicator
iGaging Angle Cube Level/Bevel Gauge
iGaging SnapDepth Digital Indicator
iGaging 0-1" Digital Thickness Gauge
iGaging 22pc Indicator Tip Set
iGaging Magnetic Base w/ Digital Indicator