You are here: Home > Router System Accessories > INCRA Mast-R-Lift & Adapters
Sort By:
Page of 1
INCRA CleanSweep Dust Collection Combo INCRA CleanSweep Dust Collection Cabinet Wixey Remote Digital Readout w/ Fractions
INCRA CleanSweep Dust Collection Cabinet
List Price: $129.95
Our Price: $114.95
You save $15.00!

INCRA MagnaLOCK Ring Set Wixey Digital Height Gauge w/ Fractions INCRA 6-pc CleanSweep MagnaLOCK Ring Set
INCRA MagnaLOCK Ring Set
List Price: $75.95
Our Price: $66.95
You save $9.00!
INCRA 6-pc CleanSweep MagnaLOCK Ring Set
List Price: $64.95
Our Price: $56.95
You save $8.00!

Router Lift Adaptors INCRA CleanSweep Router Table Adapter INCRA Router Table Routing Template
Router Lift Adaptors
List Price: $49.95
Our Price: $39.95
You save $10.00!
Router Lift Adaptors


So, you love the convenience of the INCRA Mast-R-Lift by JessEm, but you don't own a Porter-Cable 7518?You may not need to save up for a new router.

These heavy, solid-aluminum reducing collars can adapt several popular mid-size router motors to the Mast-R-Lift's carriage.The motor is removed from the router's base, the adaptor collar slips snugly over the motor, and then the motor/collar assembly is secured in the lift in the normal fashion.The benefits of precise height adjustment and above-the-table bit changes are retained when using an adaptor collar.

INCRA Router Table Routing Template


There's a lot of value the convenience, economy, and performance of a good commercially-made router table, but if you want to build a table or have a custom router installation in mind, this routing template will save you tons of time.

This 3/4"- thick MDF template is machined on computerized equipment to produce a perfect fitting table opening for 9-1/4" x 11-3/4" INCRA router lifts and router mounting plates.The generous border allows it to be clamped into position on all but the largest router tables, and there's plenty of surface area for double-sided tape, if you prefer.

Note: This template will not work for the 8-1/4" wide plate of the Rockler/INCRA Mast-R-Lift II.


A pattern router bit (bearing on the shank) with a cutting length of 1/2" to 3/4" is ideal for use with this template, and the Whiteside K-41 bit is ideal.


Recommended Accessories:

Whiteside #K-41 Pattern Routing Bit


This top-quality pattern bit has the pilot bearing on its 1/4" shank. The short 1/2" cutting length is much shorter than most pattern bits, allowing it to fit places others won't. Ideal for routing table openings with the INCRA Router Table Routing Template.

INCRA CleanSweep MagnaLOCK Porter-Cable Guide Bushing Ring Individual INCRA CleanSweep MagnaLOCK Rings INCRA MagnaLOCK Solid Insert



INCRA MagnaLOCK Ring