You are here: Home > Router System Accessories > INCRA IBox Jig for Box Joints
Sort By:
Page of 1
INCRA I-Box Zero Clearance Backing Boards iGaging E-Z View 6" Digital Caliper with Fractions INCRA HingeCrafter Drilling Guide
Daily Deal - INCRA HingeCrafter Drilling Guide
List Price: $82.95
Our Price: $77.95
Sale Price: $70.95
You save $12.00!


INCRA HingeCrafter Wood Hinge Drilling Guide
- Inches or Metric




>> Check out "Wooden Hinges with Your INCRA IBox & HingeCrafter" by Guy Dunlap

Nothing says “Craftsmanship” like adding matching wooden hinges to your projects! You've designed and built the ultimate cabinet or jewelry box, so why fool around with metal hinges and their tiny, fragile brass screws?

The HingeCrafter neatly drills hardwood hinge bodies that you’ve created using an INCRA LS Router System, INCRA I-Box, or INCRA Jig, allowing them to be pinned with commonly available 1/8”’ brass rod or hardwood dowel rod.

To match projects of all sizes, the HingeCrafter accommodates hinge barrel diameters of 3/8" (9.52mm), 1/2" (12.70mm), 5/8" (15.88mm) & 3/4" (19.05mm). The included extra long drill bit allows drilling hinges up to 10” wide, and wider hinges are possible with longer bits - your only limit is twice the fluted length of your drill bit. The variety of hinge diameters and lengths give you hundreds of options for your next project!

Use the selector above to choose between HingeCrafters based in inches or metric. Please note that the HingeCrafter must match the units used by INCRA router fences – metric INCRA fence systems require the metric HingeCrafter, etc. This does not apply to the INCRA I-Box, which can be used with either inch- or metric-based HingeCrafters.

Each wooden hinge is created with a straight bit and matching full-radius bullnose router bit. If you want to cover all the size possibilities, be sure to pair your HingeCrafter with one of our custom 8-piece Whiteside hinge making router bit sets.

Includes an extra-long drill bit and full instructions.
Made in USA.

Any Size Hinge in 8 Simple Steps:
Step 1: Prepare wood blanks
Step 2: Bullnose first round
Step 3: Bullnose second round
Step 4: Increase hinge leaf length
Step 5: Cut hinge knuckles
Step 6: Drill hinge knuckles
Step 7: Crosscut ends from blanks
Step 8: Rip hinge to desired width
INCRA I-Box Jig for Box Joints 24" x 36" Offset Router Table Top INCRA HingeCrafter Router Bit Set
INCRA I-Box Jig for Box Joints
List Price: $199.95
Our Price: $179.95
You save $20.00!
24" x 36" Offset Router Table Top
List Price: $259.95
Our Price: $219.95
You save $40.00!


INCRA 24" x 36" Offset Router Table Top


INCRA Router Fence Systems can be installed on any router table, but there's no question that using a top-quality table will improve your results. The extreme positioning accuracy of the LS Router Systems can often spotlight issues that go unnoticed with conventional router table fences - a router plate that can move in the table's opening, insert rings that aren't perfectly flush with the router plate, etc. These INCRA router tables are designed and engineered to perform under the most demanding, high-accuracy routing operations.
There is much discussion in the market place about what router tables should be made from (MDF, phenolic, aluminum, cast iron, etc.). Ultimately, though, the table's router mounting plate and HOW a router table is made will be much more important for performance than the material the material the table itself is made from.

Our router tables feature horizontal-grade, high pressure laminate applied to the top and bottom of the super-flat MDF core using heat and 100,000 pounds of pressure for a balanced, stable construction. Each computer-machined plate opening also has ten large, flat head leveling screws that form a solid steel base to support the plate, and the plates are conveniently leveled from above the table through access holes in the router plates to eliminate the need to sit on the floor with an Allen wrench. An aluminum miter channel is preinstalled to accept any miter gauge with a 3/4" x 3/8" miter bar.
The Router Mounting plate is the single most important part of any high-accuracy router table. All INCRA Router Tables come standard with super-rigid, 3/8"-thick aluminum MagnaLock router mounting plates that are pre-drilled for the most popular routers. The high energy, rare-earth magnets of the MagnaLock System allows you to instantly remove or install the included steel reducing rings, and the magnets hold the ring secure and perfectly flush with the plate every time. It's simply the most convenient and best-performing ring system available. All of our mounting plates include three laser-cut steel rings with 1", 2-1/8" and 3-5/8" openings. A simple quarter turn of the corner mounted Cam-Lock securely holds the plate snugly in the router table's recess.

Note - This table is not compatible with the unique Mast-R-Lift-II-R sold by Rockler, which uses a narrower 8-1/4"-wide top plate.

Router plate size: 9-1/4" x 11-3/4" x 3/8"
Actual table size:
23.580" x 31.580" +/-0.020"
Table thickness:
1.350" +/-0.020"
All INCRA Router Tables and Combos include the outstanding MagnaLOCK Aluminum Router Mounting Plate, but you can also upgrade to an INCRA Router Lift for the ultimate in convenience and accuracy.

Note: Router plates are pre-drilled to accept a variety of popular routers. Specify your router preference when placing an order. (See available models listed under Compatibility Chart)

Popular Accessories & Upgrades:

Improved dust collection for all of your router table work! Use the power of your shop's dust collection system to grab sawdust where it's produced on your router table! The CleanSweep cabinet attaches to the underside of laminated MDF or phenolic router tables from INCRA, Woodpeckers, JessEm, and many others. This must-have accessory is one of the easiest ways to improve the quality of your router table time!
Upgrade your combo to the ultimate in convenience with an INCRA Router Lift!If you're ordering a router lift, you can use the drop-down selector at the top of this page to remove the gold aluminum router plate from the combo for a $45 credit.

A greater variety of ring sizes gives you more support for small parts or when using different diameter.Available as a set or individually with a dozen to choose from, including a ring to accept guide bushings.

A new router table setup deserves a fresh router.Check out our full selection!



INCRA Router Bit Sets - HingeCrafter Set

INCRA Systems use router bit geometries that are widely available, so there are literally dozens of sources for compatible bits. However, the quality of the router bits you use will be a big factor in the results you'll get.

Whiteside bits are as good as you'll find, earning #1 ratings in both of the past two Fine Woodworking Magazine router bit comparison tests (May/June 2007, August 1999).

All bits are two-flute, carbide tipped models with 1/2" shank size.

HingeCrafter Set
Each wooden hinge requires a full-radius bullnose bit to shape the hinge barrel and a similarly-sized straight bit to cut the mating halves of the hinge. This set contains all of the bits necessary to produce wooden hinges with 3/8", 1/2", 5/8", and 3/4" barrel diameters.


- 3/8" Straight Bit
- 3/16" Radius Bullnose Bit

- 1/2" Straight Bit
- 1/4" Radius Bullnose Bit

- 5/8" Straight Bit
- 5/16" Radius Bullnose Bit

- 3/4" Straight Bit
- 3/8" Radius Bullnose Bit


8-Piece Metric INCRA HingeCrafter Router Bit Set I-BOX Combo #1, 1/4" & 3/8" Box Joint I-BOX Combo #4, Advanced Box Joint (Inches)
I-BOX Combo #1, 1/4" & 3/8" Box Joint
List Price: $349.95
Our Price: $324.95
You save $25.00!
I-BOX Combo #4, Advanced Box Joint (Inches)
List Price: $544.95
Our Price: $494.00
You save $50.95!




I-Box Combo #1, 1/4" & 3/8" Box Joint


Find additional information and compatibility on the pages for the combo's individual components:

INCRA I-Box Jig

Forrest 2-piece Box Joint Blade Set

(2) FREE Zero Clearance Backing Boards

This discounted two-product package is a great solution for quickly setting up and cutting box joints with 1/4" and 3/8" pin widths on your table saw.

The INCRA I-Box has already earned a stellar reputation for fast, micro-adjustable box joint setups across an infinite variety of cutter widths from 1/8" to 3/4", plus you have the option of using it at either your table saw or your router table. It's the best box joint jig ever offered for sale, bar none.

The second half of this combo is Forrest's 2-piece box joint blade set, where the blades can be swapped side to side to produce either a 1/4" or 3/8" overall cutter width. This box joint blade set will also feed faster and with less noise than a similarly-sized router bit.

In addition to being less expensive than a stacking dado set, this blade set features teeth that have a flat-top grind so they cut flatter bottoms and more perfectly square corners than even the best dados.

Forrest makes the best saw blades in the business, and this I-Box & cutter combo is an excellent-performing, cost effective kit for quickly cutting lots of box joints with narrow pins.

The I-Box features 100% zero clearance for super clean joints, and this combo also includes (2) FREE replacement zero clearance backing boards, a $19.90 value.


Need some project ideas or just want to see the I-Box in action out in the real world? Start with this user's video for making a quick and easy wine box. (picture/copy by David Picciuto)


Made in USA.


Accessories:
Improved dust collection for all of your router table work! Use the power of your shop's dust collection system to grab sawdust where it's produced on your router table! The CleanSweep cabinet attaches to the underside of laminated MDF or phenolic router tables from INCRA, Woodpeckers, JessEm, and many others. This must-have accessory is one of the easiest ways to improve the quality of your router table time!


I-Box Combo #4, Advanced Box Joint (Inches)


Find additional information and compatibility on the pages for the combo's individual components:

INCRA I-Box Jig

Forrest Dado King Stacking Dado Set

(2) FREE Zero Clearance Backing Boards

If you're serious about making box joints on your table saw, this discounted kit is the place to start, combining the ease of the INCRA I-Box with the clean cuts and flexible widths of Forrest's Dado King.

The INCRA I-Box has already earned a stellar reputation for fast, micro-adjustable box joint setups across an infinite variety of cutter widths from 1/8" to 3/4", plus you have the option of using it at either your table saw or your router table. It's the best box joint jig ever offered for sale, bar none.

Forrest's 8", 5/8"-bore Dado King stacking dado set is legendary, getting top scores in every comparison test that we've seen. Widths are adjustable from 1/4" to 29/32" in 1/32" steps to give you the most versatility for matching pin widths to your lumber widths when you're using it with the I-Box.

A dado set in a table saw will also feed faster and with less noise than a similarly-sized router bit, and beyond box joints, a top-quality dado set is a smart addition to any shop - you'll really appreciate it the next time you start a project that calls for a lot of grooving or rabbeting work.

The I-Box features 100% zero clearance for super clean joints, and this combo also includes (2) FREE replacement zero clearance backing boards, a $19.90 value.

Need some project ideas or just want to see the I-Box in action out in the real world? Start with this user's video for making a quick and easy wine box. (picture/copy by David Picciuto )


Made in USA.


Accessories:
Improved dust collection for all of your router table work! Use the power of your shop's dust collection system to grab sawdust where it's produced on your router table! The CleanSweep cabinet attaches to the underside of laminated MDF or phenolic router tables from INCRA, Woodpeckers, JessEm, and many others. This must-have accessory is one of the easiest ways to improve the quality of your router table time!

I-BOX Combo #2, Box Joint & Wooden Hinge (Inches) I-BOX Combo #3, Box Joint & Wooden Hinge (Metric) I-BOX Combo #5, Advanced Box Joint & Wooden Hinge (Inches)
I-BOX Combo #2, Box Joint & Wooden Hinge (Inches)
List Price: $564.95
Our Price: $499.95
You save $65.00!
I-BOX Combo #3, Box Joint & Wooden Hinge (Metric)
List Price: $579.95
Our Price: $509.95
You save $70.00!
I-BOX Combo #5, Advanced Box Joint & Wooden Hinge (Inches)
List Price: $899.95
Our Price: $819.00
You save $80.95!



I-Box Combo #5, Advanced Box Joint & Wooden Hinge (Inches)

Find additional information and compatibility on the pages for the combo's individual components:

INCRA I-Box Jig

INCRA HingeCrafter (imperial)

Whiteside #600 HingeCrafter Bit Set

Forrest Dado King Stacking Dado Set

(2) FREE Zero Clearance Backing Boards

This deluxe package allows you to cover all the bases at a discounted price: make a dizzying variety of box joints at either the table saw or router table, plus create unique solid wood hinges to finish off those really special projects.

The INCRA I-Box has already earned a stellar reputation for fast, micro-adjustable box joint setups across an infinite variety of cutter widths from 1/8" to 3/4", plus you have the option of using it at either your table saw or your router table. It's the best box joint jig ever offered for sale, bar none.

Nothing says "craftsmanship" like adding wooden hinges to your project, and the HingeCrafter works in conjunction with the I-Box and matching 8-piece set of top-quality Whiteside bullnose and straight router bits to create solid wood hinges in 3/8", 1/2", 5/8", and 3/4" barrel diameters and up to 10" in length.

For super clean cuts at the table saw when making box joints or for grooving & rabbeting operations, Forrest's 8", 5/8"-bore Dado King stacking dado set is in a class by itself. Widths are adjustable from 1/4" to 29/32" in 1/32" steps to give you the most versatility for matching pin widths to your lumber widths when you're using it with the I-Box. A dado set in a table saw will also feed faster and with less noise than a similarly-sized router bit, too.

The I-Box features 100% zero clearance for super clean joints, and this combo also includes (2) FREE replacement zero clearance backing boards, a $19.90 value.

Need some project ideas or just want to see the I-Box in action out in the real world? Start with this user's video for making a quick and easy wine box. (picture/copy by David Picciuto )


Made in USA.


Accessories:
Improved dust collection for all of your router table work! Use the power of your shop's dust collection system to grab sawdust where it's produced on your router table! The CleanSweep cabinet attaches to the underside of laminated MDF or phenolic router tables from INCRA, Woodpeckers, JessEm, and many others. This must-have accessory is one of the easiest ways to improve the quality of your router table time!