You are here: Home > Measuring & Marking
RELATED SHOP ACCESSORIES/
MEASURING & MARKING



PRECISION RULES:

INCRA RULE MASTER SETS


Get the benefits of all the sizes and styles! Save over 15% off the individual prices when you purchase a complete 11-piece, 14-piece, or 18-piece INCRA Rules Master Set!

INCRA Rules Master Set (Imperial)
INCRA Rules Master Set PLUS (Imperial)
INCRA Rules Master Set (Metric)



INCRA PRECISION MARKING RULES


The precision steel rule select the proper slot or hole, insert a .5mm mechanical pencil and mark the measurement with dead-on accuracy.

INCRA Precision Marking Rule in 6"
INCRA Precision Marking Rule in 12"
INCRA Precision Marking Rule in 18"
INCRA Precision Marking Rule - Metric 150mm
INCRA Precision Marking Rule - Metric 300mm
INCRA Precision Marking Rule - 10" Decimal/mm
INCRA Precision Pocket Rule - 3"x2"


INCRA PRECISION BEND RULES


INCRA Bend Rules make dual-surface layouts a snap using the corner slots.

INCRA Precision Bend Rule in 6"
INCRA Precision Bend Rule in 12"
INCRA Precision Bend Rule in 18"
INCRA Precision Bend Rule - Metric 150mm
INCRA Precision Bend Rule - Metric 300mm



INCRA PRECISION T-RULES


INCRA T-Rules make it very easy to draw exact lines in either direction.

INCRA Precision T-Rule in 6"

INCRA Precision T-Rule in 12"
INCRA Precision T-Rule in 18"
INCRA Precision Tiny T-Rule - 3"
INCRA Precision Tiny T-Rule - 75mm
INCRA Precision T-Rule - Metric 150mm
INCRA Precision T-Rule - Metric 300mm
INCRA Pro T-Rule - in 6"
INCRA Pro T-Rule - in 12"


INCRA PRECISION SPECIALTY RULES


INCRA Precision Specialty Rule - 6" Protractor
INCRA Precision Specialty Rule - 12" Centering
INCRA Precision Specialty Rule - 6" x 3" Precision X-Y Marker
INCRA Precision Specialty Rule - 160mm Protractor
INCRA Precision Specialty Rule - 300mm Centering Rule


INCRA PRECISION RULE SETS


INCRA Rules are sold individually or in complete 6", 12", and 18" sets. Each set includes the Precision Marking Rule, Precision T-Rule, and Precision Bend Rule.

INCRA Precision Rule Set in 6"
INCRA Precision Rule Set in 12"
INCRA Precision Rule Set in 18"
INCRA Precision Rule Set in 150mm
INCRA Precision Rule Set in 300mm
INCRA Pro Rule Set - in 6"
INCRA Pro Rule Set - in 12"


INCRA CUSTOM RULES


Keep your company logo in front of your customers at the very time they are involved in woodworking. Measuring, marking and layout are primary activities in the shop and your logo will be closely seen more often than any other during typical projects.


MORE PRECISION RULES


Take a look at the new added precision rules from Woodpeckers and iGaging.

Woodpeckers 24" Precision T-Square
Woodpeckers 32" Precision T-Square
Woodpeckers 24" Precision Woodworking Rule
Woodpeckers 36" Precision Woodworking Rule
Woodpeckers 24" Straight Edge Rule



LAYOUT TOOLS, SQUARES & ANGLES:

INCRA GUARANTEED SQUARES & ANGLES


INCRA's new line of Precision Squares and 45 degrees are the most accurate you will find anywhere.

INCRA Guaranteed Squares
INCRA Guaranteed Angles

INCRA GAUGE


The INCRA Gauge is Designed for Multiple Marking Needs. Works as a precision marking gauge, a freestanding depth-of-cut gauge, a fence alignment gauge and a center finder.


JESSEM METRIC WOOD SABRE MARKING GAUGE


New Metric version! Unique features, great ergonomics, and exceptional accuracy make the new JessEm Wood Sabre the new standard for marking gauges. 150mm range, micro adjustable to 0.1mm, aluminum and stainless steel construction.


JESSEM WOOD SABRE MARKING GAUGE


Unique features, good ergonomics, and exceptional accuracy make the new JessEm Wood Sabre the new standard for marking gauges. 6" range, micro adjustable to 1/256", aluminum and stainless steel construction.


INCRA 0.5MM MECHANICAL PENCIL


0.5mm Mechanical Pencil is made for all INCRA Precision Rules & Layouts. The pencil marks the work perfectly without worry of parallax or angle slip.

INCRA 0.5MM MECHANICAL PENCIL 10-PACK


INCRA 0.5mm pencils work with INCRA Rules to perfectly mark your work without parallax or angle slip, and they're ideal for all your layout tools. Preloaded with several extra leads and easily refillable after that.

IGAGING PREMIUM MARKING KNIFE


Improve the accuracy of your layout work with this good quality, well-designed marking knife. 1.5" double-edged blade, 5" hardwood handle.

SQUARES, ANGLES & STRAIGHT EDGES


Woodpeckers BC4-M2 Box Clamp
Woodpeckers 24" Straight Edge Rule
Woodpeckers 24" Precision T-Square
Woodpeckers 32" Precision T-Square
iGaging 10pc Angle Block Set
Wixey WR365 Digital Angle Gauge with Level



SETUP TOOLS :

WOODPECKERS SAW GAUGE


The Saw Gauge uses a dial indicator with a 1" stroke and 1/1000" dial graduations, perfect for aligning the blade and rip fence to the saw's miter slot, checking saw blade runout, and even diagnosing internal problems like arbor and arbor flange runout.

A-LINE-IT SYSTEM KIT


The A-Line-It was selected as the "Top Value" in the WOOD Magazine article that compared woodworking machine alignment tools. FREE DVD covers all of the basics of getting your equipment fine-tuned.

MICROJIG DADO STOP ACCESSORY FOR MATCHFIT CLAMPS


MicroJig's new Dado Stop will eliminate endless fine tuning when setting up for dados, half-lap joints, and inlay work. Automatically adjusts for any cutter widths up to 13/16".

For use with MatchFit Dovetail Clamps, sold separately. Made in USA.


MICROJIG MATCHFIT DADO STOP PRO


MicroJig's Dado Stop Pro eliminates endless fine tuning when setting up for dados, lap joints, and inlay work. Automatically adjusts for both the blade kerf and board thickness up to 13/16". Includes (1) each MatchFit Dado Stop, MatchFit Dovetail Clamp, & MatchFit Setup Gauge.


MICROJIG DADO STOP STEUP GAUGE


When you need accurate dados, the new Setup Gauge accessory for MicroJig's MatchFit Dado Stop makes that tool's setup even faster. The gauge records you blade kerf with a one-time cut, and then transfers that to your Dado Stop each time you set it to match a different material thickness. Order a couple to record your different kerf blades!

WIXEY WR365 DIGITAL ANGLE GAUGE WITH LEVEL


This updated angle gauge is a big time saver, producing machine setups accurate to 0.1 degrees. Super strong magnets, the flip-up digital display, and a permanently calibrated level feature make it the best of its type. Imported.

WIXEY MINI DIGITAL HEIGHT GAUGE


The new Mini Digital Height Gauge's unique horseshoe-shaped body has magnetic feet and allows fast, accurate setups of cutter heights or fence setups in inches or millimeters. Includes snap-in depth probe for measuring holes or grooves.

WIXEY 3" DIGITAL PROTRACTOR


This 3" Digital Protractor is the more compact of the two Wixey models and is perfect for tight spaces such as setting up band saws.

WIXEY 8" DIGITAL PROTRACTOR


This 8" Digital Protractor is the larger of the two Wixey models and is a perfect choice for layout work with lumber or setting up larger machines.

WIXEY DIGITAL HEIGHT GAUGE WITH FRACTIONS


Designed specifically for woodworking, the Wixey Height Gauge allows precision cutter height settings in decimal inch, millimeters, and even fractions simultaneously using Wixey's exclusive Precise Fraction Technology.

WIXEY DIGITAL CALIPERS WITH FRACTIONS


Designed specifically for woodworking, Wixey's Digital Calipers accurately display decimal inches and fractions simultaneously using exclusive Precise Fraction Technology. Metric capability, too!

WIXEY REMOTE DIGITAL READOUT WITH FRACTIONS


Wixey's exclusive Precise Fraction Technology is now available in a universal remote readout that adds super-precise height setups to router lifts, shapers, etc. Displays decimal inch and fractions simultaneously. Metric capability, too!

IGAGING DIGITAL DIAL INDICATOR


Value priced, super-smooth Digital replacement for standard analog dial indicators. Reads in decimal inch, fractions, or millimeters. Mounting lug for the 1/4" or 6mm hardware found on most alignment tools and indicator bases.

IGAGING E-Z VIEW 6" DIGITAL CALIPER WITH FRACTIONS


These stainless steel, 6"-range digital calipers feature a HUGE display for easy reading. Displays decimal inch, fractional inch, and millimeters at the press of a button.

IGAGING ANGLE CUBE LEVEL/BEVEL GAUGE


Measures relative angles for setting up machines or it works like a pocket level with 0.05 degree resolution.

IGAGING IP54 ANGLE GAUGE


It's rechargeable! This 3rd generation Angle Cube is loaded with features: IP54 dust & moisture protection rating, displays level & tilt to 0.05 degrees, magnetic case, optional data output to computer, and more!

IGAGING ORIGINCAL 6" IP54 DIGITAL CALIPER


iGaging's newest caliper is exceptional for the money - nicely finished, smooth action, and smart features with a 2-year warranty. "Absolute zero" based, point relative mode for checking tolerances, 6"/150mm range, 0.0005"/0.01mm resolution.



IGAGING SNAP-DEPTH DIGITAL INDICATOR


This handy gauge quickly measures groove or rabbet depths and works with many dial indicator bases. Reads in decimal inch, fractional inch, or millimeters.

IGAGING 0-1" DIGITAL THICKNESS GAUGE


Super handy, compact gauge quickly shows the thickness of your material in decimal inch, fractions, or millimeters. 0" to 1-1/6" range.

IGAGING 22PC INDICATOR TIP SET


22pc set of dial indicator tips in a broad variety of lengths and shapes. Standard threads fit conventional dial and digital indicators.

IGAGING MAGNETIC BASE W/ DIGITAL INDICATOR


Universal magnetic base with iGaging Digital Indicator and micro-adjustable arms. Perfect for setting cutter height, making fences setups and general inspection work.