|
|
|
|
|
|
ACCESSORIES
|
|
|
|
|
|
|
MICROJIG BLADEMATCH ARBOR SHIMS
Easily compensate for variations among your blades' widths! These high-quality stainless steel shims let you offset your blade's cut line to perfectly match the saw's riving knife, plus there's no need to re-zero the rip fence's scale with each blade change.
Great for tweaking the kerf width of 2-piece box joint blade sets, too.
|
| SAW BLADES |
|
RIDGE CARBIDE TS2000 10" x 40T SAW BLADE
Don't like changing blades? Ridge Carbide's TS2000 offers exceptional performance across a wide range of jobs - super smooth rips and crosscuts in solid lumber up to 2" thick, splinter-free cuts in plywood, and even basic joinery. Yes, there really is a difference between premium blades like Ridge Carbide & Forrest over the blades sold in big-box stores.
10" x 40T alternate top bevel grind w/ 8 flat raker teeth, 1/8" full kerf or 3/32" thin kerf, 5/8" arbor.
|
|
RIDGE CARBIDE TS2000 10" x 60T SAW BLADE
The 60-tooth version of the TS2000 is the ideal tool for extended crosscutting jobs in solid lumber and for ripping & crosscutting chip-prone sheet goods. Yes, there IS a difference between premium blades like Ridge Carbide & Forrest over the blades sold in big-box stores. 10" x 60T alternate top bevel grind, 1/8" (0.125") kerf, 5/8" arbor.
|
|
FORREST WOODWORKER-II 40T 10" X 1/8" KERF
The best all-around saw blade available, with super smooth cuts for both ripping and crosscutting.
40T, full 1/8" kerf, 10" dia, 5/8" bore. Made in USA.
|
|
FORREST WOODWORKER-II 40T 10" X 3/32" KERF
The best all-around saw blade available, with super smooth cuts for both ripping and crosscutting.
40T, 3/32" thin kerf, 10" dia, 5/8" bore. Made in USA.
|
| BOX JOINT & DADO SETS |
|
RIDGE CARBIDE TRIPLE PLAY BOX JOINT BLADE SET
The Triple Play is another great value in Ridge Carbide' long line of top-quality cutters - tight tolerances, extreme sharpness, and a moderate price. It's adjustable like a stack dado but cuts like dedicated flat-topped box joint blades. Kerf adjustable from 3/16" - 7/16" and micro-adjustable with included metal shims. Note: Designed for box joints and long-grain grooves only - use a conventional dado set for cross-grain cuts
|
|
FORREST 8" 2-PC BOX JOINT BLADE SET
A really high performance solution for cutting 1/4" or 3/8" box joints, this affordable two-piece set cuts cleanly and quietly. 8" dia, 5/8" bore fits most 10" table saws. Requires a throat plate for the saw that accommodates a wide cutter. Made in USA.
|
|
RIDGE CARBIDE 8" STACK DADO
Ridge Carbide's tight tolerances, extreme sharpness, and -5° hook angle will provide tearout-free grooves in both solid lumber and on fragile surfaces like veneered plywood or melamine. Adjustable from 1/4" to just over 7/8", including widths like 15/32" & 23/32" for undersized plywood, and includes mental shims for fine-tuning. 8" diameter, 5/8" arbor.
|
|
FORREST 8" DADO KING STACKING DADO SET W/ CASE
Consistently rated as the best performing dado set on the market. 1/4" to 29/32" width range, 8" dia, 5/8" bore, fine-adjustment shims and case included. Requires a throat plate for the saw that accommodates a wide cutter. Made in USA.
|
|
|
TABLE SAW ACCESSORIES/