You are here: Home > Router System Accessories > Free Standing Router Table Tops
Sort By:
Page of 1
INCRA 27" x 43" Offset Router Table Top INCRA 24" x 36" Offset Router Table Top INCRA 24" x 32" Center Mount Router Table Top
27" x 43" Offset Router Table Top
List Price: $368.95
Our Price: $299.95
You save $69.00!
24" x 36" Offset Router Table Top
List Price: $329.95
Our Price: $259.95
You save $70.00!
24" x 32" Center Mount Router Table Top
List Price: $318.95
Our Price: $234.95
You save $84.00!

INCRA 27" x 43" Offset Router Table Top


INCRA Router Fence Systems can be installed on any router table, but there's no question that using a top-quality table will improve your results. The extreme positioning accuracy of the LS Router Systems can often spotlight issues that go unnoticed with conventional router table fences - a router plate that can move in the table's opening, insert rings that aren't perfectly flush with the router plate, etc. These INCRA router tables are designed and engineered to perform under the most demanding, high-accuracy routing operations.
There is much discussion in the market place about what router tables should be made from (MDF, phenolic, aluminum, cast iron, etc.). Ultimately, though, the table's router mounting plate and HOW a router table is made will be much more important for performance than the material from which the table itself is made.

Our router tables feature horizontal-grade, high pressure laminate applied to the top and bottom of the super-flat MDF core using heat and 100,000 pounds of pressure for a balanced, stable construction. Each computer-machined plate opening also has ten large, flat head leveling screws that form a solid steel base to support the plate, and the plates are conveniently leveled from above the table through access holes in the router plates to eliminate the need to sit on the floor with an Allen wrench. An aluminum miter channel is preinstalled to accept any miter gauge with a 3/4" x 3/8" miter bar.
The Router Mounting plate is the single mosimportant part of any high-accuracy router table. All INCRA Router Tables come standard with super-rigid, 3/8"-thick aluminum MagnaLock router mounting plates that are pre-drilled for the most popular routers. The high energy, rare-earth magnets of the MagnaLock System allows you to instantly remove or install the included steel reducing rings, and the magnets hold the ring secure and perfectly flush with the plate every time. It's simply the most convenient and best-performing ring system available. All of our mounting plates include three laser-cut steel rings with 1", 2-1/8" and 3-5/8" openings. A simple quarter turn of the corner mounted Cam-Lock securely holds the plate snugly in the router table's recess.

Note - This table is not compatible with the unique Mast-R-Lift-II-R sold by Rockler, which uses a narrower 8-1/4"-wide top plate.

Router plate size: 9-1/4" x 11-3/4" x 3/8"
Actual table size:
26.830" x 43.455" +/-0.020"
Table thickness:
1.350" +/-0.030"
All INCRA Router Tables and Combos include the outstanding MagnaLOCK Aluminum Router Mounting Plate, but you can also upgrade to an INCRA Router Lift for the ultimate in convenience and accuracy.

Note: Router plates are pre-drilled to accept a variety of popular routers. Specify your router preference when placing an order.
(See available models listed under Compatibility Chart)

Popular Accessories & Upgrades:

Improved dust collection for all of your router table work! Use the power of your shop's dust collection system to grab sawdust where it's produced on your router table! The CleanSweep cabinet attaches to the underside of laminated MDF or phenolic router tables from INCRA, Woodpeckers, JessEm, and many others. This must-have accessory is one of the easiest ways to improve the quality of your router table time!
Upgrade your combo to the ultimate in convenience with an INCRA Router Lift!If you're ordering a router lift, you can use the drop-down selector at the top of this page to remove the gold aluminum router plate from the combo for a $45 credit.

A greater variety of ring sizes gives you more support for small parts or when using different diameter.Available as a set or individually with a dozen to choose from, including a ring to accept guide bushings.

A new router table setup deserves a fresh router.Check out our full selection!



INCRA 24" x 36" Offset Router Table Top


INCRA Router Fence Systems can be installed on any router table, but there's no question that using a top-quality table will improve your results. The extreme positioning accuracy of the LS Router Systems can often spotlight issues that go unnoticed with conventional router table fences - a router plate that can move in the table's opening, insert rings that aren't perfectly flush with the router plate, etc. These INCRA router tables are designed and engineered to perform under the most demanding, high-accuracy routing operations.
There is much discussion in the market place about what router tables should be made from (MDF, phenolic, aluminum, cast iron, etc.). Ultimately, though, the table's router mounting plate and HOW a router table is made will be much more important for performance than the material the material the table itself is made from.

Our router tables feature horizontal-grade, high pressure laminate applied to the top and bottom of the super-flat MDF core using heat and 100,000 pounds of pressure for a balanced, stable construction. Each computer-machined plate opening also has ten large, flat head leveling screws that form a solid steel base to support the plate, and the plates are conveniently leveled from above the table through access holes in the router plates to eliminate the need to sit on the floor with an Allen wrench. An aluminum miter channel is preinstalled to accept any miter gauge with a 3/4" x 3/8" miter bar.
The Router Mounting plate is the single most important part of any high-accuracy router table. All INCRA Router Tables come standard with super-rigid, 3/8"-thick aluminum MagnaLock router mounting plates that are pre-drilled for the most popular routers. The high energy, rare-earth magnets of the MagnaLock System allows you to instantly remove or install the included steel reducing rings, and the magnets hold the ring secure and perfectly flush with the plate every time. It's simply the most convenient and best-performing ring system available. All of our mounting plates include three laser-cut steel rings with 1", 2-1/8" and 3-5/8" openings. A simple quarter turn of the corner mounted Cam-Lock securely holds the plate snugly in the router table's recess.

Note - This table is not compatible with the unique Mast-R-Lift-II-R sold by Rockler, which uses a narrower 8-1/4"-wide top plate.

Router plate size: 9-1/4" x 11-3/4" x 3/8"
Actual table size:
23.580" x 35.580" +/-0.020"
Table thickness:
1.350" +/-0.030"
All INCRA Router Tables and Combos include the outstanding MagnaLOCK Aluminum Router Mounting Plate, but you can also upgrade to an INCRA Router Lift for the ultimate in convenience and accuracy.

Note: Router plates are pre-drilled to accept a variety of popular routers. Specify your router preference when placing an order. (See available models listed under Compatibility Chart)

Popular Accessories & Upgrades:

Improved dust collection for all of your router table work! Use the power of your shop's dust collection system to grab sawdust where it's produced on your router table! The CleanSweep cabinet attaches to the underside of laminated MDF or phenolic router tables from INCRA, Woodpeckers, JessEm, and many others. This must-have accessory is one of the easiest ways to improve the quality of your router table time!
Upgrade your combo to the ultimate in convenience with an INCRA Router Lift!If you're ordering a router lift, you can use the drop-down selector at the top of this page to remove the gold aluminum router plate from the combo for a $45 credit.

A greater variety of ring sizes gives you more support for small parts or when using different diameter.Available as a set or individually with a dozen to choose from, including a ring to accept guide bushings.

A new router table setup deserves a fresh router.Check out our full selection!




INCRA 24" x 32" Center Mount Router Table Top


INCRA Router Fence Systems can be installed on any router table, but there's no question that using a top-quality table will improve your results. The extreme positioning accuracy of the INCRA fence systems can often spotlight issues that go unnoticed with conventional router table fences - a router plate that can move in the table's opening, insert rings that aren't perfectly flush with the router plate, etc. These INCRA router tables are designed and engineered to perform under the most demanding, high-accuracy routing operations.

This 24"x32" table has the router roughly centered in the top and has the miter channel running parallel to the long dimension, making it ideal for use with the stand-alone Wonder Fence or conventional, shaper-style router fences (an offset-style table is better for INCRA positioning systems like the LS or Original INCRA Jig).
There is much discussion in the market place about what router tables should be made from (MDF, phenolic, aluminum, cast iron, etc.). Ultimately, though, the table's router mounting plate and HOW a router table is made will be much more important for performance than the material the material the table itself is made from.

Our router tables feature horizontal-grade, high pressure laminate applied to the top and bottom of the super-flat MDF core using heat and 100,000 pounds of pressure for a balanced, stable construction. Each computer-machined plate opening also has ten large, flat head leveling screws that form a solid steel base to support the plate, and the plates are conveniently leveled from above the table through access holes in the router plates to eliminate the need to sit on the floor with an Allen wrench. An aluminum miter channel is preinstalled to accept any miter gauge with a 3/4" x 3/8" miter bar.
The Router Mounting plate is the single most important part of any high-accuracy router table. All INCRA Router Tables come standard with super-rigid, 3/8"-thick aluminum MagnaLock router mounting plates that are pre-drilled for the most popular routers. The high energy, rare-earth magnets of the MagnaLock System allows you to instantly remove or install the included steel reducing rings, and the magnets hold the ring secure and perfectly flush with the plate every time. It's simply the most convenient and best-performing ring system available. All of our mounting plates include three laser-cut steel rings with 1", 2-1/8" and 3-5/8" openings. A simple quarter turn of the corner mounted Cam-Lock securely holds the plate snugly in the router table's recess.

Note - This table is not compatible with the unique Mast-R-Lift-II-R sold by Rockler, which uses a narrower 8-1/4"-wide top plate.


Router plate size: 9-1/4" x 11-3/4" x 3/8"
Actual table size:
23.580" x 31.580" +/-0.020"
Table thickness:
1.350" +/-0.030"


All INCRA Router Tables and Combos include the outstanding MagnaLOCK Aluminum Router Mounting Plate, but you can also upgrade to an INCRA Router Lift for the ultimate in convenience and accuracy.

Note: Router plates are pre-drilled to accept a variety of popular routers. Specify your router preference when placing an order.
(See available models listed under Compatibility Chart)

Popular Accessories & Upgrades:

Improved dust collection for all of your router table work! Use the power of your shop's dust collection system to grab sawdust where it's produced on your router table! The CleanSweep cabinet attaches to the underside of laminated MDF or phenolic router tables from INCRA, Woodpeckers, JessEm, and many others. This must-have accessory is one of the easiest ways to improve the quality of your router table time!
Upgrade your combo to the ultimate in convenience with an INCRA Router Lift!If you're ordering a router lift, you can use the drop-down selector at the top of this page to remove the gold aluminum router plate from the combo for a $45 credit.

A greater variety of ring sizes gives you more support for small parts or when using different diameter.Available as a set or individually with a dozen to choose from, including a ring to accept guide bushings.

A new router table setup deserves a fresh router.Check out our full selection!


INCRA CleanSweep Dust Collection Combo INCRA CleanSweep Dust Collection Cabinet INCRA 6-pc CleanSweep MagnaLOCK Ring Set
INCRA CleanSweep Dust Collection Cabinet
List Price: $142.95
Our Price: $124.95
Sale Price: $109.95
You save $33.00!
INCRA 6-pc CleanSweep MagnaLOCK Ring Set
List Price: $71.95
Our Price: $59.95
You save $12.00!

INCRA CleanSweep Router Table Adapter INCRA CleanSweep MagnaLOCK Porter-Cable Guide Bushing Ring Individual INCRA CleanSweep MagnaLOCK Rings