|
INCRA CLEANSWEEP DOWNDRAFT DUST COLLECTION SYSTEM
This must-have accessory is one of the easiest ways to improve the quality of your router table time!
|
The vacuum generated inside the cabinet by your 4" dust collection hose pulls chips and fine dust downward past the router bit, keeping the table surface and your surrounding shop cleaner than you'd ever imagined. The effect is even more powerful when combined with INCRA CleanSweep Rings for MagnaLOCK router plates and router lifts.
Unlike a dust port mounted on the fence, the CleanSweep cabinet works for every cut and not just when the fence is covering the router bit, giving you excellent collection even when routing grooves, making box joints & dovetails, or shaping curved edges without a fence.
This must-have accessory is one of the easiest ways to improve the quality of your router table time!
Keeps your shop cleaner by collecting sawdust at the source
Works for every cutting operation including routing grooves and cutting box joints & dovetails
Installs easily on every INCRA router table
Reduces router noise
Combine with INCRA CleanSweep Rings for added performance
Precision molded ABS & steel cabinet assembles quickly & accurately
Integrated 4" steel blast gate, 4" hose clamp and mounting hardware included
Vertically-sliding door saves space, seals tightly, and won't slam closed
Important:
The CleanSweep cabinet is intended for use only with conventional woodworking dust/chip collectors rated at 350 cfm or greater that have a minimum 4" inlet diameter. The CleanSweep is NOT compatible with typical Wet/Dry Shop Vacuums with 2-1/2” inlet diameters.

Compatibility notes for common router table types:
The CleanSweep cabinet screws directly to the underside of laminated MDF and phenolic router tables that have their bottom table opening and related hardware within the CleanSweep's 9-1/8" x 12-3/4" inside dimensions.
The
cabinet's maximum outside dimensions are 13" wide where the halves meet, 15"
deep front to rear (parallel to the router plate's long edges), and 15-3/4" tall from the mounting
flange to the end of the dust port.
Kreg , Woodhaven, and laminated MDF tables from JessEm require the CleanSweep Table Adapter to clear the bottom-mounted leveling mechanism used at their table openings' corners.
Dust Collection Systems that use hoses smaller than 4" are not recommended, and the CleanSweep Cabinet is not directly compatible with router tables that use remotely-operated router lifts.