You are here: Home > INCRA Parts & Components > TS-LS & TS-III Parts & Components
Sort By:
Page of 1
TS Base Mount Package - 92" Rails, 52" Rip Capacity INCRA LS 32" Range Positioner ONLY TS Base Mount Package - 72" Rails, 32" Rip Capacity
INCRA LS 32" Range Positioner ONLY
List Price: $304.95
Our Price: $259.95
You save $45.00!


TS Base Mount Package - 92" Rails, 52" Capacity


Use this package to convert your INCRA LS-25 or Ultra 24 Positioner into a full time replacement rip fence for your table saw. This is essentially the entire rail and fence system from the TS-LS rip fence, but without that system's positioner.

The package includes a 36" computer-machined rip fence, locking fence glides, positioner base support assembly, all the required brackets and hardware, and 92" TS rails. TS Rail Support Legs are standard but can be deducted for a credit if you already have a means of supporting the right-hand end of the rails. An INCRA TS-LS owner's manual covers the installation.

Notes:
1. If you plan to use an LS25 or LS17 with the TS Base Mount Package, the aluminum pedestal on the bottom of the oval-shaped base housing must be replaced with the red steel sub plate used in the TS-LS Systems. The steel sub base and hardware are included for $9.80 additional.

2. Use the option selector above to choose which Incra fence positioner you will be using with the Base Mount Package.

3. For routing operations, a router table must be installed next to the saw between the TS rails. The Wonder Fence is required to use existing INCRA joinery accessories such as the INCRA Shop Stop and Right Angle Fixture.

4. TS Rail Support Legs are included as standard equipment, but they can be deducted from the package using the option selector
.


INCRA LS32 Positioner Only
INCRA Metric LS32 Positioner Only



>> Click here to watch Guy Dunlap cuts Dovetails with the INCRA LS Positioner

Now available in metric!

As the largest fence positioner of the LS family, the LS32 was designed specifically for table saw use in conjunction with an INCRA TS Rail System.It's a direct replacement for the Ultra positioners used with the INCRA TS-II and TS-3A Fence Systems, and when equipped with the appropriate sub base, the LS32 can also serve as the foundation of a super-sized, custom router fence system.

Now available in both metric and imperial versions, the LS is the beefiest positioner we've ever produced, with rock-solid fence travels of 17", 430mm, 25", 32", or 810mm.Lifting the red locking lever causes the patented steel lead screw positioning system to instantly snap the fence to the dead center of any multiple of 1/32" or 1mm with an accuracy of 0.002" (0.05mm).This allows fence positioning far beyond what's possible by eyesight alone, and fence setups are instantly repeatable.The integrated micro adjust knob allows moving between whole increments with 0.001" (0.025mm) resolution for total control over small fence adjustments.

The lead screw adds quite a bit of mass, and because it's used for both incremental positioning and the micro adjust, the LS has fewer moving parts than the previous Ultra positioner.Other improvements include recessed, "big view" cursor windows, a large micro adjust knob conveniently located next to the fence, and all of the functions are now controlled by a single lever.And, quite simply, the sleek design is a handsome addition to any modern shop.


An engraved steel primary scale, Lexan secondary scale, and Auto Center Scale (imperial model only) are included standard.The steel fence mounting bracket accepts 1/4"-20 fasteners and is slotted vertically to accommodate several fence options and positioner installation heights.






The LS32 is directly compatible with the TS-3A rip fence extrusion when used with a table saw rail system, and is compatible with the Pro-II Joinery Fence and stand-alone Wonder Fence 37 when attached to a router table.
Note:
1.
If you have an Ultra TS-III saw fence system purchased in 1999-2000 and the rip fence has only one T-slot in the front face and one T-slot in the rear face, it will be necessary to upgrade to the newer TS-IIIA fence extrusion to use an LS Positioner.Please call for details: 888.804.6272.
2. To mount the LS32 to a router table, the standard steel sub base under the tubular base housing must be replaced with the T-slotted aluminum sub base used on the LS17 & LS25 positioners. If you intend to attach the LS32 to a router table, please place your order by phone to ensure that your positioner is shipped with the appropriate sub base.

For more detailed information, check out the LS Positioner Owner's Manual.



TS Base Mount Package - 72" Rails, 32" Rip Capacity


Use this package to convert your INCRA LS-25 or Ultra 24 Positioner into a full time replacement rip fence for your table saw. This is essentially the entire rail and fence system from the TS-LS rip fence, but without that system's positioner.

The package includes a 36" computer-machined rip fence, locking fence glides, positioner base support assembly, all the required brackets and hardware, and 72" TS rails. An INCRA TS-LS owner's manual covers the installation.

Notes:
1. If you plan to use an LS25 or LS17 with the TS Base Mount Package, the aluminum pedestal on the bottom of the oval-shaped base housing must be replaced with the red steel sub plate used in the TS-LS Systems. The steel sub base and hardware are included for $9.80 additional.

2. Use the option selector above to choose which Incra fence positioner you will be using with the Base Mount Package.

3. For routing operations, a router table must be installed next to the saw between the TS rails. The Wonder Fence is required to use existing Incra joinery accessories such as the INCRA Shop Stop and Right Angle Fixture.



INCRA LS 25" Range Positioner ONLY INCRA LS 17" Range Positioner ONLY TS Rails - 92" Capacity
INCRA LS 25" Range Positioner ONLY
List Price: $269.95
Our Price: $229.95
You save $40.00!
INCRA LS 17" Range Positioner ONLY
List Price: $234.95
Our Price: $199.95
You save $35.00!
TS Rails - 92" Length
Our Price: $156.95


INCRA LS25 Positioner Only
INCRA Metric LS25 Positioner Only



>> Click here to watch Guy Dunlap cuts Dovetails with the INCRA LS Positioner

Now available in metric!

The LS25 Fence Positioner is the perfect upgrade for INCRA Router Systems using the earlier Ultra positioners, and it's also the ideal foundation for any custom system that would benefit from its 1/1000 accuracy and repeatability. The mid-sized LS25 allows extra routing capacity on a large router table, and when fitted with the proper sub base, it offers enough fence travel to be used with the INCRA TS Table Saw Rail systems in place of the larger LS32 or Ultra 32 positioners.


Now available in both metric and imperial versions, the LS is the beefiest positioner we've ever produced, with rock-solid fence travels of 17", 430mm, 25", 635mm, 32", or 810mm.Lifting the red locking lever causes the patented steel lead screw positioning system to instantly snap the fence to the dead center of any multiple of 1/32" or 1mm with an accuracy of 0.002" (0.05mm).This allows fence positioning far beyond what's possible by eyesight alone, and fence setups are instantly repeatable.The integrated micro adjust knob allows moving between whole increments with 0.001" (0.025mm) resolution for total control over small fence adjustments.


The lead screw adds quite a bit of mass, and because it's used for both incremental positioning and the micro adjust, the LS has fewer moving parts than the previous Ultra positioner.Other improvements include recessed, "big view" cursor windows, a large micro adjust knob conveniently located next to the fence, and all of the functions are now controlled by a single lever.And, quite simply, the sleek design is a handsome addition to any modern shop.

An engraved steel primary scale, Lexan secondary scale, and Auto Center Scale (imperial model only) are included standard.The steel fence mounting bracket accepts 1/4"-20 fasteners and is slotted vertically to accommodate several fence options and positioner installation heights.The LS25 is directly compatible with the Pro-II Joinery Fence and the stand-alone Wonder Fence 37.


The LS17 and LS25 feature a removable, T-slotted sub base under the tubular base housing.The sub base allows super-clean mounting directly to the router table with the fasteners fully concealed.The LS25's base housing can also be reconfigured for use with the INCRA TS Table Saw Rail System
.

Note: The LS25's standard aluminum sub base must be replaced with a thinner steel sub base to be compatible with the Incra table saw rail systems.If you intend to use the LS25 with the TS Rail System, please place your order by phone to ensure that your positioner is shipped with the appropriate sub base. For more detailed information, check out the LS Positioner Owner's Manual.




INCRA LS17 Positioner Only
INCRA Metric LS17 Positioner Only




>> Click here to watch Guy Dunlap cuts Dovetails with the INCRA LS Positioner

Now available in metric!

The LS17 Fence Positioner is the perfect upgrade for INCRA Router Systems using the earlier Ultra Positioners, and it's also the ideal foundation for any custom system that would benefit from its 1/1000" accuracy and repeatability.In addition to router table applications, the compact size of the LS17 makes it also work well for positioning band saw fences, drill press fences, etc.


Now available in both metric and imperial versions, the LS is the beefiest positioner we've ever produced, with rock-solid fence travels of 17", 430mm, 25", 32", or 810mm.Lifting the red locking lever causes the patented steel lead screw positioning system to instantly snap the fence to the dead center of any multiple of 1/32" or 1mm with an accuracy of 0.002" (0.05mm).This allows fence positioning far beyond what's possible by eyesight alone, and fence setups are instantly repeatable.The integrated micro adjust knob allows moving between whole increments with 0.001" (0.025mm) resolution for total control over small fence adjustments.

The lead screw adds quite a bit of mass, and because it's used for both incremental positioning and the micro adjust, the LS has fewer moving parts than the previous Ultra positioner.Other improvements include recessed, "big view" cursor windows, a large micro adjust knob conveniently located next to the fence, and all of the functions are now controlled by a single lever. And, quite simply, the sleek design is a handsome addition to any modern shop.


An engraved steel primary scale, Lexan secondary scale, and Auto Center Scale (imperial model only) are included standard.The steel fence mounting bracket accepts 1/4"-20 fasteners and is slotted vertically to accommodate several fence options and positioner installation heights.The LS17 is directly compatible with the Pro-II Joinery Fence and the stand-alone Wonder Fence 37.



The LS17 and LS25 feature a removable, T-slotted sub base under the tubular base housing.The sub base allows super-clean mounting directly to the router table with the fasteners fully concealed.The LS17 is not recommended for use with the INCRA TS Table Saw Rail System.




INCRA TS Rails - 92" Length

These are replacements for the rails on TS-LS, TS-III, and TS-II Rip Fence Systems and are sold as a pair of extrusions without mounting hardware.

In a standard installation, the 92" rails provide a total rip capacity of 52" to the right of the blade and 14" to the left.


Note: The 92" TS Rails need to be supported near the end furthest from the saw, either with INCRA TS Rail Support Legs or some other means.


INCRA LS25 Super System Metric Conversion Kit INCRA LS32 Super System Metric Conversion Kit INCRA LS25 Standard System Metric Conversion Kit
INCRA LS25 Super System Metric Conversion Kit
List Price: $124.95
Our Price: $119.95
You save $5.00!
INCRA LS32 Super System Metric Conversion Kit
List Price: $124.95
Our Price: $119.95
You save $5.00!
INCRA LS25 Standard System Metric Conversion Kit
List Price: $114.95
Our Price: $109.95
You save $5.00!
INCRA LS25 Super System Metric Conversion Kit

This kit contains everything needed to convert the INCRA LS25 Super System from imperial incremental mechanics to a 1mm metric spacing. This kit contains the conversion parts for the positioner, Pro-II fence & stop, Wonder Fence, and metric joinery templates; kits for the LS25 Standard System or LS25 Positioner Only are also available.


Note: Be sure of the size of your LS Positioner before ordering a conversion! Measuring the length of the gold aluminum sliding carriage is an easy way to identify the Positioner size: The LS17 has a 25.5"-long carriage, the LS25 has a 33.5"-long carriage, and the LS32 uses a 41.5"-long carriage.

The LS25 Super System Metric Conversion Kit includes:
-
Metric Lead Screw Assembly with Micro Adjust Knob
- M
etric Threaded Element for the Clamping Mechanism
-
635mm Steel Primary Scale
-
410mm Lexan Scale
-
Metric Incremental Positioning Racks and Lexan Scales for the Wonder Fence and Shop Stop
-
Updated Master Reference Guide with 25 Box Joint and
Dovetail Templates
INCRA LS32 Super System Metric Conversion Kit

This kit contains everything needed to convert the INCRA 32" TS-LS Joinery System from imperial incremental mechanics to a 1mm metric spacing. This kit contains the conversion parts for the LS Positioner, Wonder Fence & stop, and metric joinery templates. To convert LS32 Positioners not equipped with routing accessories, use conversion kit M-LS32CONVERT.


Note: Be sure of the size of your LS Positioner before ordering a conversion! Measuring the length of the gold aluminum sliding carriage is an easy way to identify the Positioner size: The LS17 has a 25.5"-long carriage, the LS25 has a 33.5"-long carriage, and the LS32 uses a 41.5"-long carriage.


The LS32 Super System Metric Conversion Kit includes:
-
Metric Lead Screw Assembly with Micro Adjust Knob
-
Metric Threaded Element for the Clamping Mechanism
-
810mm Steel Primary Scale
-
410mm Lexan Scale
-
Metric Incremental Positioning Racks and Lexan Scales for the Wonder Fence and Shop Stop
-
Updated Master Reference Guide with 25 Box Joint and
Dovetail Templates

INCRA LS17 Super System Metric Conversion Kit TS Rails - 72" Capacity INCRA LS17 Standard System Metric Conversion Kit
INCRA LS17 Super System Metric Conversion Kit
List Price: $114.95
Our Price: $109.95
You save $5.00!
TS Rails - 72" Length
Our Price: $104.95
INCRA LS17 Standard System Metric Conversion Kit
List Price: $104.95
Our Price: $99.95
You save $5.00!
INCRA LS17 Super System Metric Conversion Kit

This kit contains everything needed to convert the INCRA LS17 Super System from imperial incremental mechanics to a 1mm metric spacing. This kit contains the conversion parts for the positioner, Pro-II fence & stop, Wonder Fence, and metric joinery templates; kits for the LS17 Standard System or LS17 Positioner Only are also available.

Note: Be sure of the size of your LS Positioner before ordering a conversion! Measuring the length of the gold aluminum sliding carriage is an easy way to identify the Positioner size: The LS17 has a 25.5"-long carriage, the LS25 has a 33.5"-long carriage, and the LS32 uses a 41.5"-long carriage.

The LS17 Super System Metric Conversion Kit includes:
-
Metric Lead Screw Assembly with Micro Adjust Knob
-
Metric Threaded Element for the Clamping Mechanism
-
430mm Steel Primary Scale
-
410mm Lexan Scale
-
Metric Incremental Positioning Racks and Lexan Scales for the Pro-II Joinery Fence and Shop Stop
-
Metric Incremental Racks and Lexan Scales for the Wonder Fence
-
Updated Master Reference Guide with 25 Box Joint and
Dovetail Templates


INCRA TS Rails - 72" Length


These are replacements for the rails on TS-LS, TS-III, and TS-II Rip Fence Systems and are sold as a pair of extrusions without mounting hardware.

In a standard installation, the 72" rails provide a total rip capacity of 32" to the right of the blade and 14" to the left, and the 92" rails increase capacity to 52" to the right and 14" to the left.
INCRA LS17 Standard System Metric Conversion Kit

This kit contains everything needed to convert the INCRA LS17 Standard System from imperial incremental mechanics to a 1mm metric spacing. This kit contains the conversion parts for the Positioner, Pro-II fence & stop, and metric joinery templates; kits for the LS17 Super System or LS17 Positioner Only are also available.

Note: Be sure of the size of your LS Positioner before ordering a conversion! Measuring the length of the gold aluminum sliding carriage is an easy way to identify the Positioner size: The LS17 has a 25.5"-long carriage, the LS25 has a 33.5"-long carriage, and the LS32 uses a 41.5"-long carriage.

The LS17 Standard System Metric Conversion Kit includes:
- Metric Lead Screw Assembly with Micro Adjust Knob
-
Metric Threaded Element for the Clamping Mechanism
- 430mm Steel Primary Scale
- 410mm Lexan Scale
- Metric Incremental Positioning Racks and Lexan Scales for the Pro-II Joinery Fence and Shop Stop
- Updated Master Reference Guide with 25 Box Joint and
Dovetail Template
INCRA LS32 Metric Conversion Kit INCRA LS25 Metric Conversion Kit INCRA LS17 Metric Conversion Kit
INCRA LS32 Metric Conversion Kit

This kit contains everything needed to convert the INCRA LS32 fence positioner from imperial incremental mechanics to a 1mm metric spacing. Please note that this kit converts only the base and sliding carriage; if your LS32 is part of a TS-LS table saw fence system that also includes routing accessories such as TS-LS Combos 1-4 or the TS-LS Joinery System, check out the M-LS32WFNCSYSCONVERT.

Note: Be sure of the size of your LS Positioner before ordering a conversion! Measuring the length of the gold aluminum sliding carriage is an easy way to identify the Positioner size: The LS17 has a 25.5"-long carriage, the LS25 has a 33.5"-long carriage, and the LS32 uses a 41.5"-long carriage.

The LS32 Metric Conversion Kit includes:
-
Metric Lead Screw Assembly with Micro Adjust Knob
-
Metric Threaded Element for the Clamping Mechanism
-
810mm Steel Primary Scale
-
410mm Lexan Scale
INCRA LS25 Metric Conversion Kit

This kit contains everything needed to convert the INCRA LS25 fence positioner from imperial incremental mechanics to a 1mm metric spacing. Please note that this kit converts only the base and sliding carriage; if your LS is part of a fence system used for producing box joints and dovetails, check out the conversion kits for the LS25 Standard System or LS25 Super System.

Note: Be sure of the size of your LS Positioner before ordering a conversion! Measuring the length of the gold aluminum sliding carriage is an easy way to identify the Positioner size: The LS17 has a 25.5"-long carriage, the LS25 has a 33.5"-long carriage, and the LS32 uses a 41.5"-long carriage.

The LS25 Metric Conversion Kit includes:
-
Metric Lead Screw Assembly with Micro Adjust Knob
-
Metric Threaded Element for the Clamping Mechanism
-
635mm Steel Primary Scale
-
410mm Lexan Scale
INCRA LS17 Metric Conversion Kit

This kit contains everything needed to convert the INCRA LS17 fence positioner from imperial incremental mechanics to a 1mm metric spacing. Please note that this kit converts only the base and sliding carriage; if your LS is part of a fence system used for producing box joints and dovetails, check out the conversion kits for the LS17 Standard System or LS17 Super System are also available.

Note: Be sure of the size of your LS Positioner before ordering a conversion! Measuring the length of the gold aluminum sliding carriage is an easy way to identify the Positioner size: The LS17 has a 25.5"-long carriage, the LS25 has a 33.5"-long carriage, and the LS32 uses a 41.5"-long carriage.

The LS17 Metric Conversion Kit includes:

- Metric Lead Screw Assembly with Micro Adjust Knob
- Metric Threaded Element for the Clamping Mechanism
- 430mm Steel Primary Scale
- 410mm Lexan Scale
Large-Saw Conversion INCRA TS Rail Support Legs TS Router Table Support Hardwares
Large-Saw Conversion
List Price: $99.95
Our Price: $74.95
Sale Price: $64.95
You save $35.00!
INCRA TS Rail Support Legs
List Price: $72.95
Our Price: $62.95
You save $10.00!
TS Router Table Support Hardware
List Price: $54.95
Our Price: $41.95
You save $13.00!


INCRA Large-Saw Conversions


An INCRA TS System is intended to be a long-term investment, and owners generally transfer their INCRA systems to new saws as they upgrade their machinery. This is an upgrade kit that allows owners of TS-LS and TS-III to install their fence systems on the newer cabinet saws that are more than 28" deep front-to-rear.

The Powermatic 2000, Saw Stop Industrial cabinet saw, 2009 and newer Unisaw, and Jet X-Acta Saw Deluxe are the most common examples.


The conversion includes a 34" base support panel and a 46-1/2" CNC machined fence section. That's 7" and 10-1/2" longer than the standard components, respectively, and they allow a TS-LS or TS-III fence system to be transferred to saws up to 33-1/2" deep.



INCRA TS Rail Support Legs




These legs directly support the rails of the TS-LS, TS-III, and TS-II Systems, adding stability to the entire saw platform. These are great for beefing up the feel of a contractor's saw even if you're not using a heavy router table next to the saw. The leg set is adjustable to allow the leg set to work with a huge variety of saws - basically any saw that has a top measuring 23" - 36" deep and a 33-3/4" to 37-1/2" height from the floor.

The top brackets lock into two T-slots with four bolts at each rail for a quick, sturdy installation with or without an extension table or router table.

The steel cross brace adds stiffness to the structure, and T-slots on the legs allow you to bridge them with a wooden panel or pegboard for storing spare blades, arbor wrenches, etc.





INCRA TS Router Table Support Hardware




Included with INCRA TS Router Tables, our all-steel hardware kit is also available separately for mounting a variety of panel-style tables within TS rail system, such as existing router tables or shop-made extension tables. The four table support brackets (two front, two rear) are installed in the T-slots on the inner face of the TS rails. The support brackets are slotted to allow fine-tuning the table height, and they accommodate tables from 3/4" thick to 1-3/8" thick (or thicker by mortising the brackets into the bottom of the table).

Two steel stiffeners screw to the underside of the table to beef up the center section of the table as it's hung from the edges.


Metric Incremental Rack Pack – 10pc. Set INCRA TS-LS Rail Mounting Brackets (pair) Metric Incremental Rack Pack – 5pc. Set
Metric Incremental Rack Pack - 10pc. Set