 |
 |
 |
 |
TS-LS Wonder Fence Joinery Package 
Now
available for imperial or metric INCRA Systems! If you own an INCRA TS System and you have a router table mounted next to your saw, the Wonder Fence Joinery Package is the way to take the quality of your woodworking to the very top level.
The INCRA Joinery Package starts with the Wonder Fence Upgrade described above to handle any shaping or moulding job you can name, and the package is then loaded with the best INCRA accessories to make your INCR Saw System a top-notch solution for box joints and dovetail joints ranging from traditional to absolutely stunning. The package includes the same accessories that are standard equipment in our LS Router Sytems.
The Master Reference Guide provides straightforward instructions and 51 joinery templates (25 in the metric
version) to slide into the positioner to provide a visual
reference for each joint pattern. Those templates can produce a mind-boggling
variety of joints - 11 box joint patterns and 29 dovetail patterns are included
(or 9 metric box joints and 16 metric dovetails), and each one of the dovetail
patterns can be cut half blind, through, sliding, or corner post. The number of
variations on the standard patterns runs into the billions if you have enough
time to experiment.
 Our Jombo Right Angle Fixture is included to keep workpieces square to the fence and router table for joinery operations. Instead of the basic stop block of typical router fences, the included INCRA Shop Stop is based on our incremental positioning racks to give you unparalleled accuracy and patented repeatability when limiting a board's travel across the router bit or setting the endpoints of stopped grooves for drawer and box bottoms.
The Joinery Package is topped off with a 1hr, 22min LS Instructional DVD. This great disc is loaded with information - how to take advantage of the Wonder Fence's advanced features, cut perfect fitting rabbets and dadoes, and it has start to finish instructions for box joints, and the four most common styles of dovetail joints.
Note: Owners
of Ultra positioner-based TS systems may need to upgrade to the new-style TS-IIIA
fence extrusion to be compatible with the Wonder Fence. Early-style
fences can be identified by having only one T-slot on the front face of the
fence and only one T-slot on the rear of the fence, and early-style fences do
not have black plastic end caps. If your system has the early-style
fence, order WFJPULTRA, which includes the newer TS-IIIA fence extrusion |
|
 |
 |
|
 |
|
 |

|