You are here: Home > INCRA Parts & Components > Router Fence System Parts & Components
Sort By:
Page of 1
INCRA Jumbo Right Fixture INCRA LS17 Metric Conversion Kit INCRA LS17 Standard System Metric Conversion Kit
INCRA LS17 Standard System Metric Conversion Kit
List Price: $104.95
Our Price: $99.95
You save $5.00!
INCRA Jumbo Right Angle Fixture
The Right Angle Fixture is used in conjunction with an INCRA router fence to keep boards square to the fence and square to the table when routing box joints or dovetails into a board's end grain.
The 10"-wide faceplate of the Jumbo Right Angle Fixture is an update of the original 6" version. A generous supply of T-slots on the face plate allows you to mount sacrificial zero-clearance backing boards and other custom fixtures.
There are two adjustment screws where the fixture rides the fence to control side-to-side movement, and a third screw holds the fixture snug against the fence as it's being loaded. The wooden runners are gentle on your router bits in the event of contact, and they're easily replaceable when necessary.
Compatible with all INCRA aluminum router fences.
INCRA LS17 Metric Conversion Kit

This kit contains everything needed to convert the INCRA LS17 fence positioner from imperial incremental mechanics to a 1mm metric spacing. Please note that this kit converts only the base and sliding carriage; if your LS is part of a fence system used for producing box joints and dovetails, check out the conversion kits for the LS17 Standard System or LS17 Super System are also available.

Note: Be sure of the size of your LS Positioner before ordering a conversion! Measuring the length of the gold aluminum sliding carriage is an easy way to identify the Positioner size: The LS17 has a 25.5"-long carriage, the LS25 has a 33.5"-long carriage, and the LS32 uses a 41.5"-long carriage.

The LS17 Metric Conversion Kit includes:

- Metric Lead Screw Assembly with Micro Adjust Knob
- Metric Threaded Element for the Clamping Mechanism
- 430mm Steel Primary Scale
- 410mm Lexan Scale
INCRA LS17 Standard System Metric Conversion Kit

This kit contains everything needed to convert the INCRA LS17 Standard System from imperial incremental mechanics to a 1mm metric spacing. This kit contains the conversion parts for the Positioner, Pro-II fence & stop, and metric joinery templates; kits for the LS17 Super System or LS17 Positioner Only are also available.

Note: Be sure of the size of your LS Positioner before ordering a conversion! Measuring the length of the gold aluminum sliding carriage is an easy way to identify the Positioner size: The LS17 has a 25.5"-long carriage, the LS25 has a 33.5"-long carriage, and the LS32 uses a 41.5"-long carriage.

The LS17 Standard System Metric Conversion Kit includes:
- Metric Lead Screw Assembly with Micro Adjust Knob
-
Metric Threaded Element for the Clamping Mechanism
- 430mm Steel Primary Scale
- 410mm Lexan Scale
- Metric Incremental Positioning Racks and Lexan Scales for the Pro-II Joinery Fence and Shop Stop
- Updated Master Reference Guide with 25 Box Joint and
Dovetail Template
INCRA LS17 Super System Metric Conversion Kit INCRA LS25 Metric Conversion Kit INCRA LS25 Standard System Metric Conversion Kit
INCRA LS17 Super System Metric Conversion Kit
List Price: $114.95
Our Price: $109.95
You save $5.00!
INCRA LS25 Standard System Metric Conversion Kit
List Price: $114.95
Our Price: $109.95
You save $5.00!
INCRA LS17 Super System Metric Conversion Kit

This kit contains everything needed to convert the INCRA LS17 Super System from imperial incremental mechanics to a 1mm metric spacing. This kit contains the conversion parts for the positioner, Pro-II fence & stop, Wonder Fence, and metric joinery templates; kits for the LS17 Standard System or LS17 Positioner Only are also available.

Note: Be sure of the size of your LS Positioner before ordering a conversion! Measuring the length of the gold aluminum sliding carriage is an easy way to identify the Positioner size: The LS17 has a 25.5"-long carriage, the LS25 has a 33.5"-long carriage, and the LS32 uses a 41.5"-long carriage.

The LS17 Super System Metric Conversion Kit includes:
-
Metric Lead Screw Assembly with Micro Adjust Knob
-
Metric Threaded Element for the Clamping Mechanism
-
430mm Steel Primary Scale
-
410mm Lexan Scale
-
Metric Incremental Positioning Racks and Lexan Scales for the Pro-II Joinery Fence and Shop Stop
-
Metric Incremental Racks and Lexan Scales for the Wonder Fence
-
Updated Master Reference Guide with 25 Box Joint and
Dovetail Templates
INCRA LS25 Metric Conversion Kit

This kit contains everything needed to convert the INCRA LS25 fence positioner from imperial incremental mechanics to a 1mm metric spacing. Please note that this kit converts only the base and sliding carriage; if your LS is part of a fence system used for producing box joints and dovetails, check out the conversion kits for the LS25 Standard System or LS25 Super System.

Note: Be sure of the size of your LS Positioner before ordering a conversion! Measuring the length of the gold aluminum sliding carriage is an easy way to identify the Positioner size: The LS17 has a 25.5"-long carriage, the LS25 has a 33.5"-long carriage, and the LS32 uses a 41.5"-long carriage.

The LS25 Metric Conversion Kit includes:
-
Metric Lead Screw Assembly with Micro Adjust Knob
-
Metric Threaded Element for the Clamping Mechanism
-
635mm Steel Primary Scale
-
410mm Lexan Scale

INCRA LS25 Super System Metric Conversion Kit INCRA LS32 Metric Conversion Kit INCRA LS32 Super System Metric Conversion Kit
INCRA LS25 Super System Metric Conversion Kit
List Price: $124.95
Our Price: $119.95
You save $5.00!
INCRA LS32 Super System Metric Conversion Kit
List Price: $124.95
Our Price: $119.95
You save $5.00!
INCRA LS25 Super System Metric Conversion Kit

This kit contains everything needed to convert the INCRA LS25 Super System from imperial incremental mechanics to a 1mm metric spacing. This kit contains the conversion parts for the positioner, Pro-II fence & stop, Wonder Fence, and metric joinery templates; kits for the LS25 Standard System or LS25 Positioner Only are also available.


Note: Be sure of the size of your LS Positioner before ordering a conversion! Measuring the length of the gold aluminum sliding carriage is an easy way to identify the Positioner size: The LS17 has a 25.5"-long carriage, the LS25 has a 33.5"-long carriage, and the LS32 uses a 41.5"-long carriage.

The LS25 Super System Metric Conversion Kit includes:
-
Metric Lead Screw Assembly with Micro Adjust Knob
- M
etric Threaded Element for the Clamping Mechanism
-
635mm Steel Primary Scale
-
410mm Lexan Scale
-
Metric Incremental Positioning Racks and Lexan Scales for the Wonder Fence and Shop Stop
-
Updated Master Reference Guide with 25 Box Joint and
Dovetail Templates
INCRA LS32 Metric Conversion Kit

This kit contains everything needed to convert the INCRA LS32 fence positioner from imperial incremental mechanics to a 1mm metric spacing. Please note that this kit converts only the base and sliding carriage; if your LS32 is part of a TS-LS table saw fence system that also includes routing accessories such as TS-LS Combos 1-4 or the TS-LS Joinery System, check out the M-LS32WFNCSYSCONVERT.

Note: Be sure of the size of your LS Positioner before ordering a conversion! Measuring the length of the gold aluminum sliding carriage is an easy way to identify the Positioner size: The LS17 has a 25.5"-long carriage, the LS25 has a 33.5"-long carriage, and the LS32 uses a 41.5"-long carriage.

The LS32 Metric Conversion Kit includes:
-
Metric Lead Screw Assembly with Micro Adjust Knob
-
Metric Threaded Element for the Clamping Mechanism
-
810mm Steel Primary Scale
-
410mm Lexan Scale
INCRA LS32 Super System Metric Conversion Kit

This kit contains everything needed to convert the INCRA 32" TS-LS Joinery System from imperial incremental mechanics to a 1mm metric spacing. This kit contains the conversion parts for the LS Positioner, Wonder Fence & stop, and metric joinery templates. To convert LS32 Positioners not equipped with routing accessories, use conversion kit M-LS32CONVERT.


Note: Be sure of the size of your LS Positioner before ordering a conversion! Measuring the length of the gold aluminum sliding carriage is an easy way to identify the Positioner size: The LS17 has a 25.5"-long carriage, the LS25 has a 33.5"-long carriage, and the LS32 uses a 41.5"-long carriage.


The LS32 Super System Metric Conversion Kit includes:
-
Metric Lead Screw Assembly with Micro Adjust Knob
-
Metric Threaded Element for the Clamping Mechanism
-
810mm Steel Primary Scale
-
410mm Lexan Scale
-
Metric Incremental Positioning Racks and Lexan Scales for the Wonder Fence and Shop Stop
-
Updated Master Reference Guide with 25 Box Joint and
Dovetail Templates
INCRA Master Reference Guide & Template Library INCRA Pro-II Joinery Fence INCRA Shop Stop
INCRA Pro-II Joinery Fence
List Price: $56.95
Our Price: $51.95
You save $5.00!
INCRA Shop Stop
Our Price: $32.55
INCRA Master Reference Guide & Template Library

Now available for imperial or metric INCRA Systems!

Written by INCRA expert Perry McDaniel, this complete guide contains clear, concise instructions for making Box Joints, Half Blind and Through Dovetails, and INCRA's trademark Double and Double-Double Joints. Over 200 detailed illustrations and photos, plus numerous handy tips help guarantee success.



The entire last half of the book is dedicated to full-size drawings of each of the 11 box joint and 29 dovetail patterns (or 9 metric box joints and 16 metric dovetails), so finding the right joint for your project is a simple as holding your boards against the pages and choosing which pattern looks the best for the width and thickness of the lumber you're using. The included Template Library contains 51 imperial or 25 metric templates for making every equally and variably spaced joint imaginable.

Within the imperial-based template library, there's even a complete set of ten "Fixed INCRAment" templates that allow easily making repetitive cuts on unusual spacings. Each template has two scales for a total of twenty patterns. They're all there - 7/16", 17/32", 7/8", etc.

Compatibility: This book and template set is included standard with INCRA LS Super Systems, LS Standard Systems, TS-LS Joinery Systems, and Ultra systems.
If you already own an INCRA System the Master Reference guide and Template Library is directly compatible with the INCRA Twin Linear, Ultra Lite, and INCRA Pro Systems, and the templates can be easily adapted for use with the Original INCRA Jig and Rockler's Universal Positioning Jig. Use the selector above to choose the correct version based on whether you own a metric- or imperial-based INCRA fence system.

Popular Accessories & Upgrades:

605-Whiteside 6-Piece INCRA Joinery Router Bit Set
These are the six router bits that produce the most popular joints. 1/4" and 3/8" diameter straight bits produce box joints and are used for countless other operations in your projects.

This set also includes the four most frequently used dovetail bits: 3/8" - 9 degree, 1/2" - 14 degree, 5/8" - 7degree, and 3/4" - 7 degree.



610-Whiteside 6-Piece Metric INCRA Joinery Router Bit Set
T
hese are the six router bits that produce the most popular joints. 6mm and 10mm diameter straight bits produce box joints and are used for countless other operations in your projects.

This set also includes four dovetail bits to cover a wide variety of material thicknesses: 5/16"-10 degree, 1/2"-14 degree, 5/8"-7 degree, and 3/4" -7 degree
.



INCRA Pro-II Joinery Fence


Now available for imperial or metric INCRA Systems!

The Pro-II joinery fence is an updated, beefed-up version of the earlier Pro-28 Fence and allows INCRA Jig Ultra positioners to be fitted with the new, super-adjustable Wonder Fence.



The Pro-II Fence is standard equipment on all LS-based Router Systems.
The extrusion is wider than the original, the face has been machined flat, and the T-slot accepts the larger hardware required by the Wonder Fence. Patented Incremental racks are installed on the rear of the fence for complete compatibility with our ShopStop and Incra Stop, and the fence directly accepts the Jumbo Right Angle fixture. A heavy duty 13" stop extender bar telescopes from either end of the fence to stop cuts on longer boards.
If you own a TS System and you want to move your routing operations to a stand-alone router table, an LS positioner and a Pro-II fence will allow you to transfer all of your existing routing accessories.


Use the selector above to match the Pro-II to the INCRA fence positioner that it will be installed on. The Pro-II fence is directly compatible with the LS17, LS25, and 12" Ultra Lite positioners. When ordered to fit the Ultra 16" & Ultra 24" positioners, the Pro-II includes an updated steel fence mounting bracket for mounting it to replace the original extruded aluminum fence mounting bracket.




INCRA Shop Stop

Now available for imperial or metric INCRA Systems!

The INCRA ShopStop is our most versatile stop.
The vertical stop bar is adjustable up and down, it can be reversed, and it has a screw-based micro adjust. The Shop Stop is also expandable - the top section can be slid into a second channel on the base section to make the interior wide enough to span an INCRA fence and a wooden sub fence of up to 3/4". INCRA's patented positioning mechanics make it deadly accurate and completely repeatable.

Compatibility: The Shop Stop works with all INCRA Router Fences that are equipped with 1/32" or 1mm incremental racks and with all INCRA Track Systems. It is NOT compatible with Flip Fences for INCRA Miter Gauges.
Metric Incremental Rack Pack – 10pc. Set Metric Incremental Rack Pack – 5pc. Set PARTS - INCRA LS Positioner Only
Metric Incremental Rack Pack - 10pc. Set

Metric Rack Packs are great for converting the mechanics of rack-based INCRA fence positioners, miter gauges, fence stops, and INCRA Track Systems for operation on a 1mm metric spacing. All metric incremental racks are 150mm long but can be shortened to match existing 4" imperial racks if desired.

Please note that micro adjust mechanisms will retain imperial measurements on products equipped with them. Also, metric-based joinery templates will be required for producing box joints and dovetails after converting from imperial spacing to metric. The metric Master Reference Guide and Template Library is available here.

10-piece Metric Rack Pack Includes:

Set of (10) Metric Incremental Racks
(2) 410mm-0mm Lexan Scale