You are here: Home > Jig & Fixture Components > T-Tracks > T-Track Plus
Sort By:
Page of 1
INCRA T-Track Plus - 18" INCRA T-Track Plus - 24" INCRA T-Track Plus - 36"
INCRA T-Track Plus - 18"
INCRA T-Track Plus - 460mm

INCRA T-Track Plus End Profile
The only T-Track with an included adjustable scale. Choose from four lengths - 18", 24", 36" and 48". Use the selector above to choose either 1/32 imperial or metric scales.

Can be cut to fit your jig exactly.

Large T-Slot accepts standard 1/4-20 hex bolts and nuts
Adjustable Lexan Scale
Available with Imperial (inch) or Metric (mm) scales
Mount easily with pre-drilled holes and included fasteners
Hard anodized aluminum for durability


Optional scales available

INCRA T-Track Plus is shipped with scales that have the zero on the right, which is appropriate for a fence on the left side of a miter saw, table saw, or drill press. For scales that read the opposite direction or read to larger measurements, you can order a wide selection of additional scales from this page
.

Workbench:
Located your favorite clamping fixture

Drill Press:
Position and lock down yourfence and clamping fixtures

Jig & Fixtures:
Set stop and hold-down position for specialty jigs

Miter Gauge:
Position a stop and slide
fence
left or right

Questions? C
all: 1.888.804.6272
INCRA T-Track Plus - 24"
INCRA T-Track Plus - 610mm

INCRA T-Track Plus End Profile
The only T-Track with an included adjustable scale. Choose from four lengths - 18", 24", 36" and 48". Use the selector above to choose either 1/32 imperial or metric scales.

Can be cut to fit your jig exactly.

Large T-Slot accepts standard 1/4-20 hex bolts and nuts
Adjustable Lexan Scale
Available with Imperial (inch) or Metric (mm) scales
Mount easily with pre-drilled holes and included fasteners
Hard anodized aluminum for durability


Optional scales available

INCRA T-Track Plus is shipped with scales that have the zero on the right, which is appropriate for a fence on the left side of a miter saw, table saw, or drill press. For scales that read the opposite direction or read to larger measurements, you can order a wide selection of additional scales from this page
.

Workbench:
Located your favorite clamping fixture

Drill Press:
Position and lock down yourfence and clamping fixtures

Jig & Fixtures:
Set stop and hold-down position for specialty jigs

Miter Gauge:
Position a stop and slide
fence
left or right

Questions? C
all: 1.888.804.6272
INCRA T-Track Plus - 36"
INCRA T-Track Plus - 915mm

INCRA T-Track Plus End Profile
The only T-Track with an included adjustable scale. Choose from four lengths - 18", 24", 36" and 48". Use the selector above to choose either 1/32 imperial or metric scales.

Can be cut to fit your jig exactly.

Large T-Slot accepts standard 1/4-20 hex bolts and nuts
Adjustable Lexan Scale
Available with Imperial (inch) or Metric (mm) scales
Mount easily with pre-drilled holes and included fasteners
Hard anodized aluminum for durability


Optional scales available

INCRA T-Track Plus is shipped with scales that have the zero on the right, which is appropriate for a fence on the left side of a miter saw, table saw, or drill press. For scales that read the opposite direction or read to larger measurements, you can order a wide selection of additional scales from this page
.

Workbench:
Located your favorite clamping fixture

Drill Press:
Position and lock down yourfence and clamping fixtures

Jig & Fixtures:
Set stop and hold-down position for specialty jigs

Miter Gauge:
Position a stop and slide
fence
left or right

Questions? C
all: 1.888.804.6272
INCRA T-Track Plus - 48"
INCRA T-Track Plus - 48"
INCRA T-Track Plus - 1220mm

INCRA T-Track Plus End Profile
The only T-Track with an included adjustable scale. Choose from four lengths - 18", 24", 36" and 48". Use the selector above to choose either 1/32 imperial or metric scales.

Can be cut to fit your jig exactly.

Large T-Slot accepts standard 1/4-20 hex bolts and nuts
Adjustable Lexan Scale
Available with Imperial (inch) or Metric (mm) scales
Mount easily with pre-drilled holes and included fasteners
Hard anodized aluminum for durability


Optional scales available

INCRA T-Track Plus is shipped with scales that have the zero on the right, which is appropriate for a fence on the left side of a miter saw, table saw, or drill press. For scales that read the opposite direction or read to larger measurements, you can order a wide selection of additional scales from this page
.

Workbench:
Located your favorite clamping fixture

Drill Press:
Position and lock down yourfence and clamping fixtures

Jig & Fixtures:
Set stop and hold-down position for specialty jigs

Miter Gauge:
Position a stop and slide
fence
left or right

Questions? C
all: 1.888.804.6272