You are here: Home > See All > Saw Blades & Dadoes > Forrest Blades
Sort By:
Page of 1
Woodpeckers BladeSavers Forrest Woodworker-II 40T 10" x 1/8" Kerf Forrest Woodworker-II 40T 10" x 3/32" Kerf
Woodpeckers BladeSavers
Our Price: $13.95
Forrest Woodworker-II 40T 10" x 1/8" Kerf
List Price: $166.00
Our Price: $134.95
You save $31.05!
Forrest Woodworker-II 40T 10" x 3/32" Kerf
List Price: $166.00
Our Price: $134.95
You save $31.05!

Forrest Woodworker-II Customized Profile 40T 10" x 1/8" Full-Kerf Blade
American-made Forrest saw blades have long been recognized as the best in the industry, combining glass-smooth cuts with long life.
The general purpose Woodworker-II gets top scores in virtually every comparison test because its superior materials and workmanship combined with proven geometry produce super-smooth cuts for both ripping and crosscutting.
With a single blade able to deliver excellent results across a broad range of operations and materials, you're able to spend more time cutting and less time changing blades!
This is the hard-to-find customized version of the Woodworker-II that cuts nearly flat-bottomed grooves.
The kerf on this model is exactly 1/8” wide, so it’s easy to get precisely-sized narrow parts off the left side of the blade – edge banding, splines, inlay stock, etc. The kerf also simplifies the math for cutting grooves and joinery.
20° face hook for easy feeding while ripping, 20° alternate top bevel for splinter-free cross cuts
Unique customized profile includes 8 flat-topped "raker" teeth that cut nearly flat-bottomed grooves. Ideal for table saw-based joinery – cutting slots, tenons, half-lap joints, and two-kerf rabbets
Double-hard, 40% stronger C-4 carbide will give up to 300% longer life between sharpenings
Exceptionally flat body significantly reduces or eliminates scoring
5/8" bore fits most 10" saws
Made in USA.
Forrest Woodworker-II Customized Profile 40T 10" x 3/32" Thin-Kerf Blade
American-made Forrest saw blades have long been recognized as the best in the industry, combining glass-smooth cuts with long life.
The general purpose Woodworker-II gets top scores in virtually every comparison test because its superior materials and workmanship combined with proven geometry produce super-smooth cuts for both ripping and crosscutting.
With a single blade able to deliver excellent results across a broad range of operations and materials, you're able to spend more time cutting and less time changing blades!
This is the hard-to-find customized version of the Woodworker-II that cuts nearly flat-bottomed grooves.
The kerf on this model is a thin 3/32” wide (0.100"), making it an excellent choice for less powerful saws or for ripping thicker lumber on cabinet saws. The thin kerf also loses 25% less lumber than a full 1/8" kerf, helping you get the best yield from narrower boards.
20° face hook for easy feeding while ripping, 20° alternate top bevel for splinter-free cross cuts
Unique customized profile includes 8 flat-topped "raker" teeth that cut nearly flat-bottomed grooves. Ideal for table saw-based joinery – cutting slots, tenons, half-lap joints, and two-kerf rabbets
Double-hard, 40% stronger C-4 carbide will give up to 300% longer life between sharpenings
Exceptionally flat body significantly reduces or eliminates scoring
5/8" bore fits most 10" saws
Made in USA.
Forrest 8" 2-pc Box Joint Blade Set Forrest 8" Dado King Stacking Dado Set w/ Case
Forrest 8" 2-pc Box Joint Blade Set
List Price: $159.00
Our Price: $134.95
You save $24.05!
Forrest 8" 2-pc Box Joint Blade Set
Forrest's matched two piece box joint blade set is a great solution if you cut a lot of smaller box joints with the INCRA I-Box. These premium blades are American-made, just like all Forrest products.
The box joint blade set's 1/4" and 3/8" cutting widths give up some of the overall versatility of a stack dado as a general woodworking tool, but the upside is that the set is much less expensive than a comparable dado set.
In addition to a lower cost, the teeth on these blades also have a flat-top grind so they cut flatter bottoms and more perfectly square corners than even the best dado sets. The box joint blade set will also feed faster and with less noise than a similarly-sized router bit.
The two 8" blades in the set are mirror images of one another when viewed from the operator's position, with their carbide tips slightly offset on each of the blades' bodies - one blade offset to the left, the other blade offset to the right. This allows the blades to be reversed side to side to create either a 1/4" or 3/8" cutting width (the blades must be used together and aren't designed to be used individually).
Hi-accuracy construction produces exceptionally flat-bottomed grooves
Twin 24T blades feature flat-top ground teeth for cutting perfectly flat bottom box joints and grooves cut parallel to the grain
Double-hard, 40% stronger C-4 carbide will give up to 300% longer life between sharpenings
5/8" bore fits most 10" table saws
Compatibility: Please note that the saw will require a throat plate with an opening appropriate for a wide cutter.
Made in USA.
Forrest 8" Dado King Stacking Dad Set w/Case
The American-made Forrest Dado King is consistently rated as the best stacking dado set sold today because of its incredible sharpness, long life, and outstanding performance in challenging materials like veneered plywood and melamine.
This is an exceptionally versatile cutting tool for making box joints with the INCRA I-Box because the variable cutting width allows a lot of flexibility for board widths in your project.
Box joints aside, every shop should have a good quality stacking dado, and you'll understand why as soon as you start a project that requires a lot of grooving or rabbeting: A dado set in a table saw will feed much faster and with far less noise than a similarly-sized router bit, plus the fine adjustment available with the included shims provides greater control. A saw's arbor can also be tilted, allowing angled joints not possible with other methods.
1/4" to 29/32" width range, includes fine adjustment shims
Cuts great either across or with the grain, negative hook on all of the cutters produces incredibly clean cuts in difficult materials
Hi-accuracy construction produces exceptionally flat-bottomed grooves
24T outer blades with 4-wing chippers, including a 3/32" chipper for working with undersize plywood
Double-hard, 40% stronger C-4 carbide will give up to 300% longer life between sharpenings
5/8" bore fits most 10" table saws
Includes a Blade Runner carrying case to protect your investment
Compatibility: Please note that the saw's arbor must be long enough to accommodate the desired stack of cutters (the arbor on some portable saws can be too short), and the saw will require a throat plate with an opening appropriate for a wide cutter.
Made in USA.