Home > TS-LS Accessories >

32" x 32" TS Router Table Top with TSRTHW
32" x 32" TS Router Table Top with TSRTHW
Alternative Views:

The 32" x 32" Right-side router table serves double duty as a work surface extension and includes a full size 3/8" x 3/4" T-Slot Miter channel. Designed for use with INCRA TS-LS and TS-III fence systems, this table is sized for saws with oversize cast iron tops measuring 30" - 31" deep along the miter slot. Support Legs for the INCRA TS main rails are highly recommended.

This table is not compatible with the unique Mast-R-Lift-II-R sold by Rockler, which uses a narrower 8-1/4"-wide top plate.

Router plate size: 9-1/4" x 11-3/4" x 3/8"
Actual table size:
31.580" x 31.580" +/-0.020"
Table thickness: 1.100" +/-0.030"

Please specify your router table plate preference when placing an order.
Made in U.S.A.

List Price: $373.95
Our Price: $299.95
You save $74.00!

Estimated availability: Estimated 1 – 2 week lead time due to high demand
Product Code: TSRT3232R

Plate option*:

Description Extended Information Router Plate Selection Chart

INCRA 32" x 32" Table Saw Router Table Top - Right Side of Blade for 30" - 31" Table Saws

Take advantage of your INCRA TS Fence System's positioning accuracy and repeatability and put the space next to your saw to work! INCRA's TS Router Tables are an easy way to add a second router table to your shop or simply make better use of space in a small shop.This right-side router table is a great way to fill the space to the right of the saw, and it generally allows transitioning between sawing and routing functions without moving the fence system's base assembly on the rails (although capacity and access around the router bit are somewhat limited compared to the Left-side TS Router Table).

This new router table is specifically sized to complement newer-model cabinet saws with oversize cast iron tops that measure between 30" and 31" deep along the miter slot.The router table attaches to the rails of INCRA TS-LS or TS-III fence systems on the right side of the saw.When combined with INCRA systems using the shorter 72" standard rails, this router table will replace the right-side cast iron extension wing and is therefore not a good choice for saws that have a motor housing protruding from the right side of the cabinet (the cast iron extension can be retained when using the longer 92" rails).Support legs under the INCRA rails will be required to keep the saw stable on most saws.

Horizontal-grade high pressure laminate is applied to the top and bottom of the MDF core using heat and 100,000 pounds of pressure for a balanced, stable construction. Each computer-machined plate opening also has ten flat head leveling screws that form a solid steel base to support the plate, and the plates are conveniently leveled from above the table through access holes in the router plates.

TS-RT Support Kit
The router tables include heavy steel hardware to attach them to the rails of the TS-LS and TS-III rip fence systems, so no attachment to the table saw is necessary. The hardware is slotted to allow fine-tuning the height of the tables, and the hardware is also available separately for mounting user-made router tables and filler boards to the INCRA TS Rails.
Solid Aluminum MagnaLOCK Plate & 3 Rings
All INCRA Router Tables come standard with a 3/8" solid aluminum Magna-Lock router mounting plates that are pre-drilled for the most popular routers. The high energy, rare-earth magnets of the Magna-Lock system allows you to instantly remove or install the included steel reducing rings, and the magnets hold the ring secure and perfectly flush with the plate every time. It's simply the most convenient and best-performing ring system available.

All of our mounting plates include three laser-cut steel rings with 1", 2-1/8" and 3-5/8" openings. A simple quarter turn of the corner mounted Cam-Lock securely holds the plate snugly in the router table's recess.

Note - This table is not compatible with the unique Mast-R-Lift-II-R sold by Rockler, which uses a narrower 8-1/4"-wide top plate.

Router plate size: 9-1/4" x 11-3/4" x 3/8"
Actual table size:
31.580" x 31.580" +/-0.020"
Table thickness:
1.100" +/-0.030"
All INCRA Router Tables and Combos include the outstanding MagnaLOCK Aluminum Router Mounting Plate, but you can also upgrade to an INCRA Router Lift for the ultimate in convenience and accuracy.

Note: Router plates are pre-drilled to accept a variety of popular routers. Specify your router preference when placing an order. (See Compatibility Chart)

Popular Accessories & Upgrades:
This sturdy leg set attaches to the rail T-slots on the TS-LS, TS-III, and TS-II saw systems, turning even a spindly-legged contractor’s saw into a rock-solid platform that’s a pleasure to use. They have a broad range of adjustment for height and saw depth and feature T-slots on the leg uprights for attaching accessories.

Improved dust collection for all of your router table work! Use the power of your shop's dust collection system to grab sawdust where it's produced on your router table! The CleanSweep cabinet attaches to the underside of laminated MDF or phenolic router tables from INCRA, Woodpeckers, JessEm, and many others. This must-have accessory is one of the easiest ways to improve the quality of your router table time!
Upgrade your combo to the ultimate in convenience with an INCRA Router Lift!If you're ordering a router lift, you can use the drop-down selector at the top of this page to remove the gold aluminum router plate from the combo for a $45 credit.

A greater variety of ring sizes gives you more support for small parts or when using different diameter.Available as a set or individually with a dozen to choose from, including a ring to accept guide bushings.

A new router table setup deserves a fresh router.Check out our full selection!

Browse for more products in the same category as this item:

TS-LS Accessories
TS-LS Accessories > TS Router Table Tops
Table Saw Router Tables
Table Saw Router Tables > Right-side TS Router Tables