Micro Jig MatchFit Dovetail Clamps (pair)

These innovative clamps are the perfect additions to your shop because they solve so many tricky & troublesome clamping situations. You’ll constantly find new uses for them!

Pick up at least a couple pairs - MatchFit clamps are economical because they don’t need aluminum T-Track. For lumber 1/2” or thicker, the clamps just slide anywhere along a 3/8”-deep groove routed with a common 1/2” – 14° dovetail bit.

Neatly attach fixtures and auxiliary surfaces to anything in your shop: Table extensions, sub fences, customizable clamping tables, stop blocks, hold downs, and more.

Unlike the fixed jaw of conventional clamps, MatchFit clamps leave one surface clear of obstructions – think of clamping an auxiliary fence to your table saw’s rip fence.

Slot-mounting lets you place clamps anywhere on a surface, not just at the edge. Put a clamp in the middle of a 4’x8’ sheet of plywood, if you like.

Pop them up through holes in your bench top to increase your hold down options, or rout dovetail slots to expand the capabilities of Festool’s Multi-Function Tables.

Mount occasionally-used items like bench grinders or pocket hole jigs to wooden bases with dovetail grooves routed in the bottom, then use MatchFit clamps to cleanly attach the tools to your workbench when needed.

Simplify shop-made edge guides for routers and circular saws – you no longer need three hands because the MatchFit clamp can’t fall off the edge guide while you’re setting up a cut.

Sold in pairs, compatible with material 1/2” or thicker

Jaw depth 2-3/8” (60mm), clamping range 0” – 5-1/4” (130mm), new soft-grip handle.