You may want to add routing functions to your INCRA saw fence, or maybe you've realized that your LS router system deserves a better router table. Whatever your needs, you've found the source for accessories and upgrades that unlock your INCRA system's full potential.

INCRA has taken a modular approach to producing table saw and router fence systems for twenty years, a concept which allows you to cost-effectively expand your system and allows owners of earlier systems to upgrade to the performance of the latest INCRA products.

If you need expert advice or don't find what you're looking for, call us directly at 1.888.804.6272.




UPGRADE YOUR ROUTER TABLE SYSTEM NOW!

INCRA I-BOX JIG FOR BOX JOINTS


This is the most advanced box joint jig ever produced! Works at both table saws and router tables, features micro-adjustable joint tightness, and allows pin widths from 1/8" - 3/4". Fast setup for basic joints, plus advanced capability for unique decorative joints, too. Hand screw clamp not included. Made in USA.

Click here to see all I-Box Combos & Accessories

INCRA MAST-R-LIFT II & MAST-R-LIFT II CONVERSIONS

New and improved! Allows precise height adjustments and change router bits above the table. Direct-drive, super low friction, and it's compatible with wide variety of fixed base routers without the need for adapters. Fits every INCRA router table.

INCRA PRL-V2 LIFT & ADAPTORS

The concept is like nothing else: To raise or lower the router quickly, the quick lifting tool disengages the lift's mechanism and the spring assist allows the heaviest routers to travel freely along the lift's 3-1/4" range of travel with very light effort and no cranking. The router's collet can be raised above the table for bit changes in two seconds.

ROUTER FENCE REPLACEMENT PARTS

Whether you're replacing crash-damaged parts or want additional INCRA components for a custom installation, this portion of Incremental Tools provides direct access to the parts, accessories, and sub-assemblies that are most often asked for.

PUSHGUARD & HOLD DOWNS

Make your woodworking safer with our broad selection of push blocks and hold downs for every application.

ROUTER LIFT ADAPTORS MILWAUKEE 5625 SHIM KIT

Adapters are available for different routers. Milwaukee 5625 Shim Kit for INCRA Mast-R-Lift.

ROUTERS & MOTORS

Complete your INCRA system with a new router!

FREE STANDING ROUTER TABLE TOPS

INCRA Router Fence Systems can be installed on any router table. Solid Aluminum MagnaLOCK Plate Included.

24" x 32" Center Mount Router Table Top
24" x 36" Offset Router Table Top
27" x 43" Offset Router Table Top

INCRA CLEANSWEEP DUST COLLECTION

Keeps your shop cleaner by collecting sawdust at the source using your 4" dust collector! Easy-assembling precision molded ABS & steel cabinet attaches to the underside of laminated MDF or phenolic router tables from INCRA, Woodpeckers, and many others.

INCRA CleanSweep Dust Collection Combo
INCRA CleanSweep Dust Collection Cabinet
INCRA 6-pc CleanSweep MagnaLOCK Ring Set
Individual INCRA CleanSweep MagnaLOCK Rings
INCRA CleanSweep MagnaLOCK Porter-Cable Guide Bushing Ring
INCRA CleanSweep Router Table Adapter

INCRA MAGNALOCK RING SET - 8 RINGS

Simply drop any plate into the keyed recess and the MagnaLock plate snaps smartly into place held securely in place by 4 high-energy rare earth Magnets.

Buy Individual INCRA MagnaLOCK Ring
MagnaLOCK Porter-Cable Guide Bushing Ring
INCRA 6-pc CleanSweep MagnaLOCK Ring Set
Individual INCRA CleanSweep MagnaLOCK Rings
INCRA CleanSweep MagnaLOCK Porter-Cable Guide Bushing Ring
Porter-Cable 9-piece Guide Bushing Set
INCRA MagnaLOCK Solid Insert

INCRA MAGNALOCK ROUTER TABLE PLATES

INCRA's 3/8" solid aluminu mounting plates are the new standard for achieving perfect cutting results at your router table.

PORTER-CABLE 9-PIECE GUIDE BUSHING SET

Set includes 7 steel guide bushings in popular sizes plus two lock rings, all in a fitted case. Compatible with all brands of router bases or router plate rings that have a recessed 1-3/16" center hole. Made in USA, 3yr warranty.

INCRA ROUTER TABLE STANDS

INCRA's new Router Table Stands provide a rock solid base to build on. Available in 2 sizes.

Router Table Stand - for UP to 36" Wide Table
Router Table Stand - for UP to 43" Wide Table

INCRA JIG FENCE SYSTEM

Designed for the Original INCRA Jig. Combine this Fence System with the INCRA Jig Positioner for all standard router table work.

INCRA SHELF SUPPORTS

These are extra sets of the short stringers for the Router Table Stand 36 and Router Table Stand 43.

Wooden panel not included.

JESSEM POW-R-TEK REMOTE ROUTER SWITCH

This heavy duty 15 Amp switch allows switching the router without reaching under the table. Mounted to a steel bracket that attaches easily to INCRA router table stands or other router tables. Imported.

INCRA ROUTER STAND WHEEL KITS

Use this INCRA Wheel Kit to make your router table mobile in a small shop. Compatible with our Router Table Stand 36 and Router Table Stand 43.

INCRA LS POSITIONER UPGRADES

The LS is the beefiest positioner we've ever produced, with rock-solid capacities of 17", 25", or 32".

INCRA LS 17" Range Positioner ONLY
INCRA LS 25" Range Positioner ONLY
INCRA LS 32" Range Positioner ONLY

INCRA WONDER FENCE UPGRADES

Upgrade an existing INCRA TS Saw System, Ultra Router System, or LS Router System to the versatility of the Wonder Fence!

INCRA PRO-II JOINERY FENCE

The INCRA Pro-II Fence System includes the machined 28" fence section, incremental racks, and 13" Telescoping Stop Extender Bar.

Now available for imperial or metric INCRA Systems!

INCRA JUMBO RIGHT FIXTURE

The INCRA Jumbo Right Angle Fixture is used to hold your workpiece perpendicular to the table surface during end grain cutting operations.

INCRA PROJECTS & TECHNIQUES BOOK

This 148 page book contains detailed plans with over 400 illustrations and photos to build 14 of Perry McDaniel's intriguing original projects. Available in both hardcopy and downloadable versions.

Order hardcopy click here
Order downloadable version click here

WOODPECKERS COPING SLED

This is simply the best coping sled on the market, greatly improving your control when routing end grain. Great quality construction, nice details, versatile design.

ROUTER BIT SETS

American-made Whiteside bits are as good as you'll find, earning #1 ratings in both of the past two Fine Woodworking Magazine router bit comparison tests.

8-Piece INCRA HingeCrafter Router Bit Set
6-Piece INCRA Joinery Router Bit Set
6-Piece Metric INCRA Joinery Router Bit Set
8-Piece Metric INCRA HingeCrafter Router Bit Set
Whiteside Ten Essential Router Bits
Whiteside Basic Router Bit Set
Whiteside Roundover & Beading Bit Set
Whiteside Multi-Beading Roundover Bit Set
Whiteside K-41 Pattern Routing Bit

INCRA HINGECRAFTER

The INCRA HingeCrafter serves as a drilling guide for solid wood hinges in 3/8" (9.52mm), 1/2" (12.70mm), 5/8" (15.88mm) & 3/4" (19.05mm) barrel sizes and up to 10" long. Just combine your 1/32"- or metric-based INCRA Positioner or I-Box with the HingeCrafter drill guide and the results will be beautiful wooden hinges ready to glue right into your project. Made in USA.

INCRA ROUTER TABLE PLATE TEMPLATE

This 3/4"-thick MDF template is machined on computerized equipment to produce a perfect fitting opening for INCRA or Woodpeckers router lifts and router mounting plates.

ROUTER FENCE STOPS

INCRA Shop Stop- For IncraLOCK Cut-Off Fences ONLY. The INCRA Shop Stop is our most versatile stop, as it works with all of our router fences and also INCRA Track systems.

METRIC COMPONENTS

The Metric Conversion Kit contains everything needed to convert the LS Positioner System from imperial incremental mechanics to a 1mm metric spacing. Metric Rack Packs and scales can convert any incremental rack-based INCRA positioning product from imperial to a 1mm metric spacing.

IGAGING MAGNETIC LED WORK LIGHTS

Improve your accuracy by getting a better view with this exclusive work light kit. Includes iGaging flexible-arm magnetic base, detachable LED flashlight, and a mounting plate with hardware.

SETUP TOOLS

Wixey Digital Height Gauge w/ Fractions
Wixey Digital Calipers w/ Fractions
Wixey Remote Digital Readout w/ Fractions
iGaging Digital Dial Indicator
iGaging Angle Cube Level/Bevel Gauge
iGaging SnapDepth Digital Indicator
iGaging 0-1" Digital Thickness Gauge
iGaging 22pc Indicator Tip Set
iGaging Magnetic Base w/ Digital Indicator