You are here: Home > TS-LS Accessories > TS Base Mount Packages
Sort By:
Page of 1
TS Base Mount Package - 72" Rails, 32" Rip Capacity TS Base Mount Package - 92" Rails, 52" Rip Capacity


TS Base Mount Package - 72" Rails, 32" Rip Capacity


Use this package to convert your INCRA LS-25 or Ultra 24 Positioner into a full time replacement rip fence for your table saw. This is essentially the entire rail and fence system from the TS-LS rip fence, but without that system's positioner.

The package includes a 36" computer-machined rip fence, locking fence glides, positioner base support assembly, all the required brackets and hardware, and 72" TS rails. An INCRA TS-LS owner's manual covers the installation.

Notes:
1. If you plan to use an LS25 or LS17 with the TS Base Mount Package, the aluminum pedestal on the bottom of the oval-shaped base housing must be replaced with the red steel sub plate used in the TS-LS Systems. The steel sub base and hardware are included for $9.80 additional.

2. Use the option selector above to choose which Incra fence positioner you will be using with the Base Mount Package.

3. For routing operations, a router table must be installed next to the saw between the TS rails. The Wonder Fence is required to use existing Incra joinery accessories such as the INCRA Shop Stop and Right Angle Fixture.





TS Base Mount Package - 92" Rails, 52" Capacity


Use this package to convert your INCRA LS-25 or Ultra 24 Positioner into a full time replacement rip fence for your table saw. This is essentially the entire rail and fence system from the TS-LS rip fence, but without that system's positioner.

The package includes a 36" computer-machined rip fence, locking fence glides, positioner base support assembly, all the required brackets and hardware, and 92" TS rails. TS Rail Support Legs are standard but can be deducted for a credit if you already have a means of supporting the right-hand end of the rails. An INCRA TS-LS owner's manual covers the installation.

Notes:
1. If you plan to use an LS25 or LS17 with the TS Base Mount Package, the aluminum pedestal on the bottom of the oval-shaped base housing must be replaced with the red steel sub plate used in the TS-LS Systems. The steel sub base and hardware are included for $9.80 additional.

2. Use the option selector above to choose which Incra fence positioner you will be using with the Base Mount Package.

3. For routing operations, a router table must be installed next to the saw between the TS rails. The Wonder Fence is required to use existing INCRA joinery accessories such as the INCRA Shop Stop and Right Angle Fixture.

4. TS Rail Support Legs are included as standard equipment, but they can be deducted from the package using the option selector
.