Home > Jig & Fixture Components >

Micro Jig MatchFit Dovetail Clamps (pair)
Micro Jig MatchFit Dovetail Clamps (pair)
Alternative Views:

These unique clamps will save you time and aggravation in too many ways to list! MatchFit clamps slide anywhere along a groove routed with a common 1/2” – 14° dovetail bit and leave one surface of your work clear of obstructions. Use these clamps to create customizable clamping tables and for attaching table extensions, sub fences, stop blocks, hold downs, and more to your machinery and work tables.

Sold in pairs. Jaw depth 2-3/8" (60mm), clamping range 0" – 5-1/4", compatible with material 1/2" or thicker.

Our Price: $39.95

Estimated availability: Usually Ships in 1 to 3 Business Days
Product Code: MJDVC-525K2

Micro Jig MatchFit Dovetail Clamps (pair)

These innovative MatchFit clamps will be a perfect addition to your arsenal because they simplify so many tricky & troublesome clamping situations.

ick up at least a couple pairs - MatchFit clamps are economical because there’s no investment in aluminum T-track. Just rout a dovetail groove directly into your jigs & fixtures with a common 1/2” – 14° dovetail bit and slide the clamps into position anywhere along the groove. The grooves are 3/8” deep, so you can use the clamps with material 1/2” or thicker.

The problem with conventional clamps is that they place jaws on both sides of your work, usually leaving their fixed jaw right in your way, like when you’re clamping an auxiliary fence to your table saw’s rip fence. By comparison, the MatchFit clamp is embedded in only the back face of the component you’re clamping, leaving the opposite side completely clear of obstructions.

Because the MatchFit clamp engages only one face of a board, you’re also not limited by the jaw depth of conventional clamps – their jaw depth is 2-3/8”, but MatchFit clamps can be placed any distance from the edge of a board. You could even put a clamp in the center of a 4’x8’ sheet of plywood…you probably won’t need to, but you could.

MatchFit clamps can neatly attach fixtures and auxiliary surfaces to almost anything in your shop: Table extensions, sub fences, customizable clamping tables, stop blocks, hold downs, and more.

At your work bench, pop them upward through holes in the bench top to hold down wooden stop blocks or bench dogs. As you can imagine, these clamps are ideal for expanding the capabilities of Festool’s Multi Function Tables.

For occasionally-used items like bench grinders or pocket hole jigs, mount these tools to wooden bases that have dovetail grooves routed in them, then use MatchFit clamps to cleanly attach the machines to your bench when you need them.

Shop-made edge guides for routers and circular saws are also simplified – you no longer need three hands because the MatchFit clamp is captured and can’t fall off the edge guide while you’re setting up a cut.

Jaw depth 2-3/8” (60mm), clamping range 0” – 5-1/4”.


Browse for more products in the same category as this item:

Jig & Fixture Components
Jig & Fixture Components > Clamping