INCRA LS32 Positioner Only
INCRA Metric LS32 Positioner Only



>> Click here to watch Guy Dunlap cuts Dovetails with the INCRA LS Positioner

Now available in metric!

As the largest fence positioner of the LS family, the LS32 was designed specifically for table saw use in conjunction with an INCRA TS Rail System.It's a direct replacement for the Ultra positioners used with the INCRA TS-II and TS-3A Fence Systems, and when equipped with the appropriate sub base, the LS32 can also serve as the foundation of a super-sized, custom router fence system.

Now available in both metric and imperial versions, the LS is the beefiest positioner we've ever produced, with rock-solid fence travels of 17", 430mm, 25", 32", or 810mm.Lifting the red locking lever causes the patented steel lead screw positioning system to instantly snap the fence to the dead center of any multiple of 1/32" or 1mm with an accuracy of 0.002" (0.05mm).This allows fence positioning far beyond what's possible by eyesight alone, and fence setups are instantly repeatable.The integrated micro adjust knob allows moving between whole increments with 0.001" (0.025mm) resolution for total control over small fence adjustments.

The lead screw adds quite a bit of mass, and because it's used for both incremental positioning and the micro adjust, the LS has fewer moving parts than the previous Ultra positioner.Other improvements include recessed, "big view" cursor windows, a large micro adjust knob conveniently located next to the fence, and all of the functions are now controlled by a single lever.And, quite simply, the sleek design is a handsome addition to any modern shop.

An engraved steel primary scale, Lexan secondary scale, and Auto Center Scale (imperial model only) are included standard.The steel fence mounting bracket accepts 1/4"-20 fasteners and is slotted vertically to accommodate several fence options and positioner installation heights.

The LS32 is directly compatible with the TS-3A rip fence extrusion when used with a table saw rail system, and is compatible with the Pro-II Joinery Fence and stand-alone Wonder Fence 37 when attached to a router table.

Note:
1. If you have an Ultra TS-III saw fence system purchased in 1999-2000 and the rip fence has only one T-slot in the front face and one T-slot in the rear face, it will be necessary to upgrade to the newer TS-IIIA fence extrusion to use an LS Positioner.Please call for details: 888.804.6272.

2. To mount the LS32 to a router table, the standard steel sub base under the tubular base housing must be replaced with the T-slotted aluminum sub base used on the LS17 & LS25 positioners. If you intend to attach the LS32 to a router table, please place your order by phone to ensure that your positioner is shipped with the appropriate sub base.

For more detailed information, check out the LS Positioner Owner's Manual.

INCRA LS25 Positioner Only
INCRA Metric LS25 Positioner Only

>> Click here to watch Guy Dunlap cuts Dovetails with the INCRA LS Positioner

Now available in metric!

The LS25 Fence Positioner is the perfect upgrade for INCRA Router Systems using the earlier Ultra positioners, and it's also the ideal foundation for any custom system that would benefit from its 1/1000” accuracy and repeatability. The mid-sized LS25 allows extra routing capacity on a large router table, and when fitted with the proper sub base, it offers enough fence travel to be used with the INCRA TS Table Saw Rail systems in place of the larger LS32 or Ultra 32 positioners.

Now available in both metric and imperial versions, the LS is the beefiest positioner we've ever produced, with rock-solid fence travels of 17", 430mm, 25", 635mm, 32", or 810mm.Lifting the red locking lever causes the patented steel lead screw positioning system to instantly snap the fence to the dead center of any multiple of 1/32" or 1mm with an accuracy of 0.002" (0.05mm).This allows fence positioning far beyond what's possible by eyesight alone, and fence setups are instantly repeatable.The integrated micro adjust knob allows moving between whole increments with 0.001" (0.025mm) resolution for total control over small fence adjustments.

The lead screw adds quite a bit of mass, and because it's used for both incremental positioning and the micro adjust, the LS has fewer moving parts than the previous Ultra positioner.Other improvements include recessed, "big view" cursor windows, a large micro adjust knob conveniently located next to the fence, and all of the functions are now controlled by a single lever.And, quite simply, the sleek design is a handsome addition to any modern shop.

An engraved steel primary scale, Lexan secondary scale, and Auto Center Scale (imperial model only) are included standard.The steel fence mounting bracket accepts 1/4"-20 fasteners and is slotted vertically to accommodate several fence options and positioner installation heights.The LS25 is directly compatible with the Pro-II Joinery Fence and the stand-alone Wonder Fence 37.

The LS17 and LS25 feature a removable, T-slotted sub base under the tubular base housing.The sub base allows super-clean mounting directly to the router table with the fasteners fully concealed.The LS25's base housing can also be reconfigured for use with the INCRA TS Table Saw Rail System .

Note: The LS25's standard aluminum sub base must be replaced with a thinner steel sub base to be compatible with the Incra table saw rail systems.If you intend to use the LS25 with the TS Rail System, please place your order by phone to ensure that your positioner is shipped with the appropriate sub base. For more detailed information, check out the LS Positioner Owner's Manual.

INCRA LS17 Positioner Only
INCRA Metric LS17 Positioner Only

>> Click here to watch Guy Dunlap cuts Dovetails with the INCRA LS Positioner

Now available in metric!

The LS17 Fence Positioner is the perfect upgrade for INCRA Router Systems using the earlier Ultra Positioners, and it's also the ideal foundation for any custom system that would benefit from its 1/1000" accuracy and repeatability.In addition to router table applications, the compact size of the LS17 makes it also work well for positioning band saw fences, drill press fences, etc.

Now available in both metric and imperial versions, the LS is the beefiest positioner we've ever produced, with rock-solid fence travels of 17", 430mm, 25", 32", or 810mm. Lifting the red locking lever causes the patented steel lead screw positioning system to instantly snap the fence to the dead center of any multiple of 1/32" or 1mm with an accuracy of 0.002" (0.05mm).This allows fence positioning far beyond what's possible by eyesight alone, and fence setups are instantly repeatable. The integrated micro adjust knob allows moving between whole increments with 0.001" (0.025mm) resolution for total control over small fence adjustments.

The lead screw adds quite a bit of mass, and because it's used for both incremental positioning and the micro adjust, the LS has fewer moving parts than the previous Ultra positioner. Other improvements include recessed, "big view" cursor windows, a large micro adjust knob conveniently located next to the fence, and all of the functions are now controlled by a single lever. And, quite simply, the sleek design is a handsome addition to any modern shop.

An engraved steel primary scale, Lexan secondary scale, and Auto Center Scale (imperial model only) are included standard. The steel fence mounting bracket accepts 1/4"-20 fasteners and is slotted vertically to accommodate several fence options and positioner installation heights. The LS17 is directly compatible with the Pro-II Joinery Fence and the stand-alone Wonder Fence 37.

The LS17 and LS25 feature a removable, T-slotted sub base under the tubular base housing. The sub base allows super-clean mounting directly to the router table with the fasteners fully concealed. The LS17 is not recommended for use with the INCRA TS Table Saw Rail System.

INCRA LS25 Super System Metric Conversion Kit

This kit contains everything needed to convert the INCRA LS25 Super System from imperial incremental mechanics to a 1mm metric spacing. This kit contains the conversion parts for the positioner, Pro-II fence & stop, Wonder Fence, and metric joinery templates; kits for the LS25 Standard System or LS25 Positioner Only are also available.

Note: Be sure of the size of your LS Positioner before ordering a conversion! Measuring the length of the gold aluminum sliding carriage is an easy way to identify the Positioner size: The LS17 has a 25.5"-long carriage, the LS25 has a 33.5"-long carriage, and the LS32 uses a 41.5"-long carriage.

The LS25 Super System Metric Conversion Kit includes:
- Metric Lead Screw Assembly with Micro Adjust Knob
- Metric Threaded Element for the Clamping Mechanism
- 635mm Steel Primary Scale
- 410mm Lexan Scale
- Metric Incremental Positioning Racks and Lexan Scales for the Wonder Fence and Shop Stop
- Updated Master Reference Guide with 25 Box Joint and Dovetail Templates

INCRA LS32 Super System Metric Conversion Kit

This kit contains everything needed to convert the INCRA 32" TS-LS Joinery System from imperial incremental mechanics to a 1mm metric spacing. This kit contains the conversion parts for the LS Positioner, Wonder Fence & stop, and metric joinery templates. To convert LS32 Positioners not equipped with routing accessories, use conversion kit M-LS32CONVERT.

Note: Be sure of the size of your LS Positioner before ordering a conversion! Measuring the length of the gold aluminum sliding carriage is an easy way to identify the Positioner size: The LS17 has a 25.5"-long carriage, the LS25 has a 33.5"-long carriage, and the LS32 uses a 41.5"-long carriage.


The LS32 Super System Metric Conversion Kit includes:
- Metric Lead Screw Assembly with Micro Adjust Knob
- Metric Threaded Element for the Clamping Mechanism
- 810mm Steel Primary Scale
- 410mm Lexan Scale
- Metric Incremental Positioning Racks and Lexan Scales for the Wonder Fence and Shop Stop
- Updated Master Reference Guide with 25 Box Joint and Dovetail Templates