    INCRA Miter 2000 with 27" Cut-off Fence, Shop Stop
To watch the complete INCRA Miter Gauges video click here
 The revolutionary Miter 2000 completely and absolutely solves that frustrating problem all too familiar to woodworkers - making perfect miter cuts on the table saw or router table. Laser cut in solid steel,these "teeth" lock in fence angles every 1°. A separate offset feature provides resolution down to 1/2°. For even finer resolution, switch to continuous operation for fence angles anywhere between 1/2° steps. AngleLOCK your next miter cut.But that's just half the story. The Miter 2000 comes with the new INCRA Shop Stop AND the 27" IncraLOCK Cut-off Fence, where INCRA's patented incremental positioning system gives you perfect accuracy and repeatability for controlling the length of your cut. The fence's front T-slot make easy work of attaching a wooden zero-clearance sub fence, and the Shop Stop features an expandable body to allow use with sub fences up to 3/4" thick. Compatibility: The MIter 2000's adjustable miter bar will fit square-sided miter slots 3/4" wide, 3/8" deep, and either with or without a 15/16" wide T-slot at the bottom. The miter bar's adjustment range accomodates actual slot widths between 0.740" to 0.765".
Available for Shopsmith! The Miter 2000 is available in a special version to fit Shopmsith machines, which have miter slots that are both narrower and shallower than the 3/8" x 3/4" standard size (use the options selector above). The Shopsmith version is equipped with an 18" fence instead of the 27" fence of the standard version.
 INCRA Shop Stop with Automatic Positioning Control
Instantly control the length of your cut with INCRA's legendary machine shop accuracy and perfect repeatability. The INCRA Shop Stop positions your work in EXACT 1/32" steps, with continuous micro-adjustability in between.
Also available for Shopsmith table (see above options).
Questions? Call: 1.888.804.6272 |
